Look at the folder's name in flash memory where GUI files are stored. It must match what you defined under "ip http path flash:/GUI" and btw is case sensitive :-P
Rgs, Roger Carpio. On Mon, May 30, 2011 at 2:08 PM, Randall Crumm <rrcr...@yahoo.com> wrote: > HI, > Here is a dumb question, but causing me issues. > > My cue is stable and I can log in to the web page with the user from the > cue cli. > > Now when I start the initialization wizard I keep getting "login to CME as > administrator failed. check CME config." > > Am I suppose to use the user under tele-service? In my case admin/c1sc0123? > > snip-its > > ip http server > ip http authentication local > no ip http secure-server > ip http path flash:/GUI > > > telephony-service > max-ephones 7 > max-dn 7 > ip source-address 10.10.110.3 port 2000 > voicemail 3600 > max-conferences 8 gain -6 > call-forward pattern .T > web admin system name admin password c1sc0123 > dn-webedit > transfer-system full-consult > transfer-pattern . > transfer-pattern .T > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com