I agree with Bartosz and Steve's answers i'd check the threshold and associate COS 4 to Queue 2 on a either threshold 1 or 2 and then modify the threshold to be 60% or whatever they're asking
2011/6/2 Steve Denney (stdenney) <[email protected]> > CoS 4,6,7 are probably mapped to queue 2 threshold 2. Just move CoS 4 to > queue 2 threshold **1**, then make sure the threshold settings for queue 2 > are 60 100 100 100 (the last 3 values aren’t critical, you just need the 60 > so that CoS 4 packets are dropped starting at threshold 1 – 60%). > > > > cheers, sd > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *adam compton > *Sent:* Thursday, June 02, 2011 1:10 PM > *To:* <[email protected]> > *Subject:* [OSL | CCIE_Voice] drop packets from 3750 output queue 2 > > > > I have a switch qos item I am not sure how to address: > > When queue 2 reaches 60% capacity COS 4 packets should be dropped. > > COS 4,6,7 is mapped to queue 2. any ideas? > > Adam Compton > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
