The map-class is the workaround and as far as I know the bandwidth command wont work.
Regards, Roger Carpio. On Tue, Jun 14, 2011 at 6:02 PM, Bill Lake <whl...@gmail.com> wrote: > I think if you set the bandwidth to greater than 768 you will not have this > applied to the interface for BR2 > > On Tue, Jun 14, 2011 at 5:17 PM, Roig Borrell, Francesc Xavier < > francesc.ro...@tecnocom.es> wrote: > >> Hi all, >> >> >> >> If in the exam in Qos WAN exercise were asked to configure MLF or FR12 >> between HQ and SB, supposing there is only one physical interface in HQ, the >> traffic shaping applied will affect the BR2 subintertace appliying a >> default mincir 28000 which is a problem for more than one call >> >> >> >> >> >> HQ#sh frame-relay pvc 102 >> >> >> >> cir 56000 bc 7000 be 0 byte limit 875 interval 125 >> >> >> mincir 28000 byte increment 875 Adaptive Shaping none >> >> pkts 533 bytes 168144 pkts delayed 526 bytes delayed >> 166528 >> >> shaping active >> >> traffic shaping drops 0 >> >> Queueing strategy: fifo >> >> Output queue 39/40, 56 drop, 531 dequeued >> >> HQ# >> >> >> >> Should we create this specific class map for BR2 as a workaround, or >> shouldn’t we do anything because nothing has been required for BR2 and we >> would breaking a requirement? >> >> >> >> map-class frame-relay BR2 >> >> frame-relay cir 1536000 >> >> frame-relay bc 15360 >> >> frame-relay be 0 >> >> frame-relay mincir 1536000 >> >> >> >> >> >> Which would be the right answer? What do you think? >> >> >> >> Thanks in advance! Regards >> >> Francesc >> >> >> >> >> >> >> >> Francesc Xavier Roig Borrell >> >> Network Senior Consultant >> >> Integración de Sistemas y Tecnología >> >> C/Santander, 49-51 >> >> Barcelona 08020 >> >> Tel. Fijo: (+34) 934965108 ext 64697 >> >> Tel. Móvil / Fax: (+34) 647 32 21 55 (24697) / (+34) 934965161 >> >> email: francesc.ro...@tecnocom.es >> >> http://www.tecnocom.es >> >> >> >> *Por favor, antes de imprimir este mensaje, asegúrate de que es >> necesario. Ayudemos a cuidar el medio ambiente* >> >> *Este mensaje puede contener información confidencial o privilegiada. Si >> le ha llegado por error, rogamos no haga uso del mismo, avise al remitente y >> bórrelo. **Consulte **aviso >> legal<http://www.tecnocom.es/Paginas/InformacionLegal.aspx> >> * >> *This message may contain confidential or privileged information. If it >> has been sent to you in error, please do not use it, notify the sender of >> the error and delete it. **See **legal >> notice<http://www.tecnocom.es/sites/en/Paginas/InformacionLegal.aspx> >> * >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
<<image001.jpg>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com