Anyone can help me with this? Thanks
On Thu, Jul 14, 2011 at 8:41 PM, Abel ... <midga...@gmail.com> wrote: > Hello everyone, I'm have this strange issue with PhoneView, for some reason > registered phones can be remotely access from the App, a screenshot of the > app is attached on the mail. Also this is using CME configuration, here is > the config: > > Thanks for the help everyone > > BR2-RTR#sh running-config > Building configuration... > > > Current configuration : 3642 bytes > ! > ! Last configuration change at 02:33:50 UTC Fri Jul 15 2011 > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname BR2-RTR > ! > boot-start-marker > boot system flash c2800nm-adventerprisek9_ivs-mz.124-22.T5.bin > boot-end-marker > ! > card type e1 0 0 > logging message-counter syslog > ! > no aaa new-model > clock timezone UTC 1 > clock summer-time UTC recurring 1 Sun Apr 1:00 last Sun Oct 1:00 > network-clock-participate wic 0 > ! > dot11 syslog > ip source-route > ! > ! > ip cef > ip dhcp excluded-address 10.10.202.1 10.10.202.49 > ip dhcp excluded-address 10.10.202.70 10.10.202.254 > > ip dhcp pool PHONES > network 10.10.202.0 255.255.255.0 > default-router 10.10.202.1 > option 150 ip 10.10.110.3 > ! > ! > no ipv6 cef > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > voice-card 0 > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > controller E1 0/0/0 > ! > ! > ! > ! > ! > interface Loopback0 > ip address 10.10.110.3 255.255.255.255 > ip ospf network point-to-point > ! > interface FastEthernet0/0 > no ip address > duplex auto > speed auto > ! > interface FastEthernet0/0.200 > encapsulation dot1Q 200 native > ip address 10.10.102.1 255.255.255.0 > ! > interface FastEthernet0/0.400 > encapsulation dot1Q 400 > ip address 10.10.202.1 255.255.255.0 > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface Serial0/1/0 > no ip address > encapsulation frame-relay IETF > no fair-queue > frame-relay lmi-type ansi > ! > interface Serial0/1/0.1 point-to-point > ip address 10.10.112.2 255.255.255.0 > ip ospf mtu-ignore > snmp trap link-status > frame-relay interface-dlci 102 > ! > interface Service-Engine1/0 > no ip address > shutdown > ! > router ospf 1 > router-id 10.10.202.1 > log-adjacency-changes > network 10.10.0.0 0.0.255.255 area 0 > ! > ip forward-protocol nd > ip http server > no ip http secure-server > ! > ! > ! > ! > ixi transport http > response size 4 > no shutdown > request outstanding 1 > ! > ixi application cme > no shutdown > ! > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > ccm-manager fax protocol cisco > ! > mgcp fax t38 ecm > ! > ! > ! > ! > ! > ! > gatekeeper > shutdown > ! > ! > telephony-service > xml user admin password cisco 15 > max-ephones 4 > max-dn 4 > ip source-address 10.10.110.3 port 2000 > auto assign 1 to 4 > url authentication http://10.10.110.3/CCMCIP/authenticate.asp admin cisco > network-locale ES > network-locale 1 ES > network-locale 2 ES > network-locale 3 ES > network-locale 4 ES > max-conferences 8 gain -6 > transfer-system full-consult > server-security-mode non-secure > create cnf-files version-stamp 7960 Jul 15 2011 02:21:16 > ! > ! > ephone-dn 1 dual-line > number 3001 > ! > ! > ephone-dn 2 dual-line > number 3002 > ! > ! > ephone-dn 3 dual-line > number 3003 > ! > ! > ephone-dn 4 dual-line > number 3004 > ! > ! > ephone 1 > no phone-ui speeddial-fastdial > no multicast-moh > device-security-mode none > mac-address 8CB6.4FF7.EB14 > keepalive 30 auxiliary 0 > codec g729r8 pre-ietf > type 7965 > button 1:1 > ! > ! > ! > ephone 2 > no phone-ui speeddial-fastdial > no multicast-moh > device-security-mode none > mac-address 40F4.ECEE.6924 > keepalive 30 auxiliary 0 > codec g729r8 pre-ietf > type 7965 > button 1:2 > ! > ! > ! > ephone 3 > no phone-ui speeddial-fastdial > no multicast-moh > device-security-mode none > keepalive 30 auxiliary 0 > ! > ! > ! > ephone 4 > no phone-ui speeddial-fastdial > no multicast-moh > device-security-mode none > keepalive 30 auxiliary 0 > ! > ! > ! > line con 0 > exec-timeout 0 0 > line aux 0 > line 66 > no activation-character > no exec > transport preferred none > transport input all > transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh > line vty 0 4 > login > ! > scheduler allocate 20000 1000 > ntp server 10.10.100.2 > end > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
