correction : the default on the GW is FS , and the CCM can fall back to SS automatically :)
sorry guys, thanks for refresh my memory Ash On Wed, Jul 27, 2011 at 9:12 PM, Ashraf Ayyash <ash.ayy...@gmail.com> wrote: > Hello William , Joe > > the default on the is SS not FS and if you enable FS for the outgoing > calls on the CCM you will always need MTP otherwise the option will be > grad out , > > MTP will fix this issue , can you please try to not enable FS and > allocate MTP and test and then enable FS on both the CCM and the GW > and try as well , > > to enable FS on the GW you need to add : > voice service voip > h323 > call start fast > > this will isolate the issue . > > Note : > if the CCM will fail to negotiate FS , it wil fall back to use SS > automatically , you can see this clearly in the CCM SDI/SDL traces > > Best regards > Ash > > On Wed, Jul 27, 2011 at 9:07 PM, William Affeldt > <william.affe...@yahoo.com> wrote: >> That is usually the result of fast start not being enabled. I would also try >> mtp required if that alone does not fix it. >> >> Sent from my iPhone >> >> On Jul 27, 2011, at 10:52 AM, Joel Tyson <joel.ty...@gmail.com> wrote: >> >>> Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When >>> setting CUBE to use g729 taking the transcoder out of the picture the calls >>> worked fine. With xcoding to g711 on cube the originating phone (hq ph1) >>> continues to ring after picking up BR2 phone. Any help iseatly >>> appreciated. >>> >>> Thanks! >>> Joel >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com