Problem: in Vol2 Lab7 DISA Dialing tasks 3.1 and 3.2 I can get either of them to work separately but not together. Any thoughts?
Task 3.1: when the Remote Destination calls in, show the CLID as the Remote Destination# and not the Mobility User 4D extension. Solution: Configure a special CSS-SNR-3002 for the RDP CSS: this CSS contains the partition PT-SNR-3002 which has a sole translation pattern: pattern: XXXX partition: PT-SNR-3002 css: CSS-internal use "Calling Party External Mask": check digit manipulation: --nil-- When the RD calls in to an internal DN, the pattern is matched and the CLID is changed from 3002 to +447976852817 (the RD#). Task 3.2: Configure DISA dialing at the IVR menu. Solution: once the RDP CSS contains the translation pattern from 3.1 it breaks any sort of DISA dialing. If I change the RDP CSS to the CSS of the Branch2 phones (no 3.1 translation pattern), all onward dialing works - internal DNs all the way to international calls. The moment I have any sort of translation pattern in the RDP CSS I cannot invoke onward dialing: I get through the IVR, press 1, dial <NUMBER># and nothing - the connection is severed. I.e., the RDP CSS has the "XXXX" translation pattern, to allow onward dialing I add the same partitions in the Branch2 phones Device CSS. Theoretically I should now be able to onward dial to internal DNs and all external patterns. But this fails completely. If I remove the translation pattern CSS of 3.1 and replace it with CSS-internal that sees all internal DNs, everything works. So somehow the translation pattern which swaps out the ANI is interfering with onward dialing. BTW in System Parameters I have changed the Remote Destination CSS setting to RDP+Line CSS as recommended in the DSG.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
