I have not tested the operator VM yet, but will test it tomorrow.

I have not created any rules except the default ones.
These mail boxes has not reached the Disk capacity, because the internal IP
Phone can leave the voice mails without problem.
On Sat, Nov 26, 2011 at 10:11 AM, Prakash kumar <[email protected]
> wrote:

> 3. Re: CUC problems (Message 3)
>
>
> When ever the calls comes from pstn the calling no should be sent to cuc
> as 4 digits (internal extension number length) .When a call comes to cuc is
> it leaving message for the operator extension ? Have u checked this ?
>
>
> From what you told your Direct Routing rules are working correctly .The
> pbm is happening for fwded calls  Have you created any other forwarded
> routing rules ?
>
> Has the mailbox reached the full capacity ?
>
> Please let me know  the these details .
>
> Thanks,
> Prakash
>
>
>
> On Sat, Nov 26, 2011 at 7:42 AM, 
> <[email protected]>wrote:
>
>> Send CCIE_Voice mailing list submissions to
>>        [email protected]
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>        http://onlinestudylist.com/mailman/listinfo/ccie_voice
>> or, via email, send a message with subject or body 'help' to
>>        [email protected]
>>
>> You can reach the person managing the list at
>>        [email protected]
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of CCIE_Voice digest..."
>>
>>
>> Today's Topics:
>>
>>   1. Documentation Access and Where to Go (Edgar Feliz)
>>   2. Re: Documentation Access and Where to Go (Larry Stern)
>>   3. Re: CUC problems (Gurpreet Singh Kukreja)
>>   4. Re: CUC problems (Edgar Feliz)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Fri, 25 Nov 2011 17:07:55 -0500
>> From: Edgar Feliz <[email protected]>
>> To: [email protected], Larry Stern
>>        <[email protected]>
>> Subject: [OSL | CCIE_Voice] Documentation Access and Where to Go
>> Message-ID:
>>        <CABxks5T0sGCA5R7cVDHFB+QTN=
>> [email protected]>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> This is a list of what we know could be required urls and features for any
>> given lab and were to go to find it if needed. Please add to the list
>> below
>> as this was just a starting point. My intent is to have the urls needed as
>> part of the 20-30 minute initial read and documentation of the lab and
>> than
>> have a better idea of where to go for things that may come out of the
>> blue.
>>
>>
>> SRND7x
>>
>>   1. IPMA =  p936
>>   2. EM  = p929
>>   3. CUPS = p897
>>
>> CCX Doc
>> ICD + 1button = Support > voice & CUCM > Contact Center Express
>>
>> MVA = CUCM > help > search > mobile voice access > look for H323/PRI
>>
>> CME Feature and configuration = Documentation > CME> tech notes and config
>> guide
>>
>> E
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> </archives/ccie_voice/attachments/20111125/972776df/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Fri, 25 Nov 2011 17:24:47 -0500
>> From: Larry Stern <[email protected]>
>> To: Edgar Feliz <[email protected]>
>> Cc: "[email protected]" <[email protected]>
>> Subject: Re: [OSL | CCIE_Voice] Documentation Access and Where to Go
>> Message-ID: <[email protected]>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Awesome
>>
>> BACD-Cisco unified Call mgr express ---------Config Guides
>> Bkgrnd picture--And ring list--- Voice unified
>> communications---iPhones----7900 series-------maintain operate--7965 admin
>> guide. However for whatever reason on my pod (30) at RTP, I got access
>> denied, but I am told others did not, I do not know where they sat. I
>> basically lost those points.
>>
>>
>>
>> Sent from my iPad
>>
>> On Nov 25, 2011, at 5:07 PM, "Edgar Feliz" <[email protected]<mailto:
>> [email protected]>> wrote:
>>
>> This is a list of what we know could be required urls and features for
>> any given lab and were to go to find it if needed. Please add to the list
>> below as this was just a starting point. My intent is to have the urls
>> needed as part of the 20-30 minute initial read and documentation of the
>> lab and than have a better idea of where to go for things that may come out
>> of the blue.
>>
>>
>> SRND7x
>>
>>  1.  IPMA =  p936
>>  2.  EM  = p929
>>  3.  CUPS = p897
>>
>> CCX Doc
>> ICD + 1button = Support > voice & CUCM > Contact Center Express
>>
>> MVA = CUCM > help > search > mobile voice access > look for H323/PRI
>>
>> CME Feature and configuration = Documentation > CME> tech notes and
>> config guide
>>
>> E
>>
>>
>>
>> ________________________________
>> This email and any files transmitted with it are confidential and are
>> intended for the sole use of the individual to whom they are addressed.
>> Black Box Corporation reserves the right to scan all e-mail traffic for
>> restricted content and to monitor all e-mail in general. If you are not the
>> intended recipient or you have received this email in error, any use,
>> dissemination or forwarding of this email is strictly prohibited. If you
>> have received this email in error, please notify the sender by replying to
>> this email.
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> </archives/ccie_voice/attachments/20111125/76d2a918/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Fri, 25 Nov 2011 18:02:55 -0500
>> From: Gurpreet Singh Kukreja <[email protected]>
>> To: datucha123 datucha123 <[email protected]>
>> Cc: "[email protected]" <[email protected]>
>> Subject: Re: [OSL | CCIE_Voice] CUC problems
>> Message-ID:
>>        <CABmpSZRK-MqHk861JqHcraCD1WpzgcYqCPPw3A=
>> [email protected]>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> Hi,
>>
>> Try this:
>>
>> 1) Make sure that under the "Voice Mail Profile" configuration, "Voice
>> Mail
>> Box Mask" has a mask of XXXX if you're using four digit port numbers.
>> 2) Second, remove all the CSS and partitions if applied on the VM Port
>> Group, the Hunt Pilot & the MWIs.
>>
>> Did you pick up Call Manager SDI traces yet? What do you see in them? Does
>> this work fine internally if you dial from an IP Phone registered with the
>> CM?
>>
>>
>> - Gurpreet
>>
>>
>>
>> On Fri, Nov 25, 2011 at 2:21 PM, datucha123 datucha123 <
>> [email protected]
>> > wrote:
>>
>> > I have tried to Restart CUC, as I do not have any issues the CUCM DB
>> > replication. But still not success :(
>> >
>> > On Fri, Nov 25, 2011 at 7:40 PM, Edgar Feliz <[email protected]> wrote:
>> >
>> >> I have had this 2 x and in one I had a DB issue and had to do a db sync
>> >> restart sub, the other I had to restart the CUC.
>> >>
>> >> E
>> >>
>> >>
>> >> On Fri, Nov 25, 2011 at 9:01 AM, datucha123 datucha123 <
>> >> [email protected]> wrote:
>> >>
>> >>> As I know, the CUC has the G729 Support as well, So I do not think
>> that
>> >>> the issue is because of Tarsncoder.
>> >>>
>> >>> My local Phones with G729 can leave a voice mail without a problem
>> >>>
>> >>>   On Fri, Nov 25, 2011 at 5:17 PM, Ax <[email protected]> wrote:
>> >>>
>> >>>>  Hi,
>> >>>>
>> >>>> I had simila issue,for on-net calls is working fine but for off-net
>> >>>> incoming call not so I had to insert an transcoder resource in mrgl
>> of
>> >>>> gateway.
>> >>>> You can do another test without transcoder but be sure you are using
>> >>>> g711 from pstn  gateway --> ccm--> ip phone.
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>> Ion
>> >>>>
>> >>>>
>> >>>>  ------------------------------
>> >>>> *From:* datucha123 datucha123 <[email protected]>
>> >>>> *To:* [email protected]
>> >>>> *Sent:* Friday, November 25, 2011 12:35 PM
>> >>>> *Subject:* [OSL | CCIE_Voice] CUC problems
>> >>>>
>> >>>>  Hello,
>> >>>>
>> >>>> I have a problem with CUC.
>> >>>>
>> >>>> When the external (PSTN) caller leaves a VM for CUCM IP phones, the
>> MWI
>> >>>> does not lights up, and even the recorded message is not present in
>> the
>> >>>> users mailbox. WHile the CUC tells the PSTN caller that the message
>> has
>> >>>> been received. But actually, I cannot have it in my Phones inbox,
>> nor the
>> >>>> MWI is turned On.
>> >>>>
>> >>>> Why is it so?
>> >>>>
>> >>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> For more information regarding industry leading CCIE Lab training,
>> >>>> please visit www.ipexpert.com
>> >>>>
>> >>>> Are you a CCNP or CCIE and looking for a job? Check out
>> >>>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> <
>> http://www.platinumplacement.com/>
>> >>>>
>> >>>>
>> >>>
>> >>> _______________________________________________
>> >>> For more information regarding industry leading CCIE Lab training,
>> >>> please visit www.ipexpert.com
>> >>>
>> >>> Are you a CCNP or CCIE and looking for a job? Check out
>> >>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> <
>> http://www.platinumplacement.com/>
>> >>>
>> >>
>> >>
>> >
>> > _______________________________________________
>> > For more information regarding industry leading CCIE Lab training,
>> please
>> > visit www.ipexpert.com
>> >
>> > Are you a CCNP or CCIE and looking for a job? Check out
>> > www.PlatinumPlacement.com <http://www.platinumplacement.com/>
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> </archives/ccie_voice/attachments/20111125/66763c70/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Fri, 25 Nov 2011 21:12:32 -0500
>> From: Edgar Feliz <[email protected]>
>> To: Gurpreet Singh Kukreja <[email protected]>
>> Cc: "[email protected]" <[email protected]>
>> Subject: Re: [OSL | CCIE_Voice] CUC problems
>> Message-ID:
>>        <CABxks5Tzb6n5UU2SakDUoYDaLdz9tfqmcQNUP-qSVg1t+=
>> [email protected]>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> I am having the same problem today!!! I just rebooted the CUC and am
>> waiting to see.
>>
>> E
>>
>> On Fri, Nov 25, 2011 at 6:02 PM, Gurpreet Singh Kukreja <
>> [email protected]> wrote:
>>
>> > Hi,
>> >
>> > Try this:
>> >
>> > 1) Make sure that under the "Voice Mail Profile" configuration, "Voice
>> > Mail Box Mask" has a mask of XXXX if you're using four digit port
>> numbers.
>> > 2) Second, remove all the CSS and partitions if applied on the VM Port
>> > Group, the Hunt Pilot & the MWIs.
>> >
>> > Did you pick up Call Manager SDI traces yet? What do you see in them?
>> Does
>> > this work fine internally if you dial from an IP Phone registered with
>> the
>> > CM?
>> >
>> >
>> > - Gurpreet
>> >
>> >
>> >
>> >
>> > On Fri, Nov 25, 2011 at 2:21 PM, datucha123 datucha123 <
>> > [email protected]> wrote:
>> >
>> >> I have tried to Restart CUC, as I do not have any issues the CUCM DB
>> >> replication. But still not success :(
>> >>
>> >> On Fri, Nov 25, 2011 at 7:40 PM, Edgar Feliz <[email protected]>
>> wrote:
>> >>
>> >>> I have had this 2 x and in one I had a DB issue and had to do a db
>> sync
>> >>> restart sub, the other I had to restart the CUC.
>> >>>
>> >>> E
>> >>>
>> >>>
>> >>> On Fri, Nov 25, 2011 at 9:01 AM, datucha123 datucha123 <
>> >>> [email protected]> wrote:
>> >>>
>> >>>> As I know, the CUC has the G729 Support as well, So I do not think
>> that
>> >>>> the issue is because of Tarsncoder.
>> >>>>
>> >>>> My local Phones with G729 can leave a voice mail without a problem
>> >>>>
>> >>>>   On Fri, Nov 25, 2011 at 5:17 PM, Ax <[email protected]> wrote:
>> >>>>
>> >>>>>  Hi,
>> >>>>>
>> >>>>> I had simila issue,for on-net calls is working fine but for off-net
>> >>>>> incoming call not so I had to insert an transcoder resource in mrgl
>> of
>> >>>>> gateway.
>> >>>>> You can do another test without transcoder but be sure you are using
>> >>>>> g711 from pstn  gateway --> ccm--> ip phone.
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> Ion
>> >>>>>
>> >>>>>
>> >>>>>  ------------------------------
>> >>>>> *From:* datucha123 datucha123 <[email protected]>
>> >>>>> *To:* [email protected]
>> >>>>> *Sent:* Friday, November 25, 2011 12:35 PM
>> >>>>> *Subject:* [OSL | CCIE_Voice] CUC problems
>> >>>>>
>> >>>>>  Hello,
>> >>>>>
>> >>>>> I have a problem with CUC.
>> >>>>>
>> >>>>> When the external (PSTN) caller leaves a VM for CUCM IP phones, the
>> >>>>> MWI does not lights up, and even the recorded message is not
>> present in the
>> >>>>> users mailbox. WHile the CUC tells the PSTN caller that the message
>> has
>> >>>>> been received. But actually, I cannot have it in my Phones inbox,
>> nor the
>> >>>>> MWI is turned On.
>> >>>>>
>> >>>>> Why is it so?
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> _______________________________________________
>> >>>>> For more information regarding industry leading CCIE Lab training,
>> >>>>> please visit www.ipexpert.com
>> >>>>>
>> >>>>> Are you a CCNP or CCIE and looking for a job? Check out
>> >>>>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> <
>> http://www.platinumplacement.com/>
>> >>>>>
>> >>>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> For more information regarding industry leading CCIE Lab training,
>> >>>> please visit www.ipexpert.com
>> >>>>
>> >>>> Are you a CCNP or CCIE and looking for a job? Check out
>> >>>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> <
>> http://www.platinumplacement.com/>
>> >>>>
>> >>>
>> >>>
>> >>
>> >> _______________________________________________
>> >> For more information regarding industry leading CCIE Lab training,
>> please
>> >> visit www.ipexpert.com
>> >>
>> >> Are you a CCNP or CCIE and looking for a job? Check out
>> >> www.PlatinumPlacement.com <http://www.platinumplacement.com/>
>> >>
>> >
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: </archives/ccie_voice/attachments/20111125/86661164/attachment.html>
>>
>> ------------------------------
>>
>> _______________________________________________
>> CCIE_Voice mailing list
>> [email protected]
>> http://onlinestudylist.com/mailman/listinfo/ccie_voice
>>
>>
>> End of CCIE_Voice Digest, Vol 69, Issue 181
>> *******************************************
>>
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com <http://www.platinumplacement.com/>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to