Check your privacy setting on the device and make sure its off. On Dec 11, 2011 5:49 PM, <ccie_voice-requ...@onlinestudylist.com> wrote:
> Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. CBarge with SNR (John McGaughey (jomcgaug)) > 2. Re: lab/6 MGCP TS got the lab in Dubai really hard luck (Ray) > 3. Re: srst behaviour under telephony-service (Mohammed Al Baqari) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 11 Dec 2011 12:34:37 -0800 > From: "John McGaughey (jomcgaug)" <jomcg...@cisco.com> > To: <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] CBarge with SNR > Message-ID: > < > 28cea477be98ed48af08a0b637a74bf40f7b4...@xmb-sjc-224.amer.cisco.com> > Content-Type: text/plain; charset="us-ascii" > > I'm working on Workbook 2, Lab 7, section 3.3. I created a CFB resource > on BR2 and associated it with the BR2 MRGL. This MRGL is associated > with the BR2 Device Pool. When using a BR2 phone to create a conference > it works with no issue. It allocates from the br2-cfb resource just > fine. > > > > If I make a call from BR2 Phone 2's remote destination number to an HQ > phone, I can see the line button on the BR2 Phone 2 light red. If I > press this button to invoke the single button barge I get a fast busy. > I made sure all the Locations are set to unrestricted. > > > > Looking at the trace I see that it never tries to allocate from the > br2-cfb resource. It only looks at what's in the default MRGL. I've > got the phone, device pool, and gw using the BR2 MRGL, but every time I > pres the single button barge it never sees br2-cfb. Am I missing > another device that needs the MRGL set to BR2_MRGL? I checked the RDP > but don't see an option. > > > > Any ideas? > > > > John > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20111211/1ad6955c/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Sun, 11 Dec 2011 13:08:16 -0800 (PST) > From: Ray <jonha...@yahoo.com> > To: Marksnap Marky <markysna...@yahoo.com>, > "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] lab/6 MGCP TS got the lab in Dubai > really hard luck > Message-ID: > <1323637696.12064.yahoomail...@web120917.mail.ne1.yahoo.com> > Content-Type: text/plain; charset="utf-8" > > check out this link,, it may help ... > > http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml > > > ________________________________ > From: Marksnap Marky <markysna...@yahoo.com> > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Sent: Sunday, December 11, 2011 12:03 PM > Subject: [OSL | CCIE_Voice] lab/6 MGCP TS got the lab in Dubai really hard > luck > > > Can anyone guide how to solve lab 6 MGCP TS > > 3.4 ??????MGCP Troubleshooting > ? > Management has confirmed that there are instances of one way audio from > outbound calls made from HQ phones. Please provide the appropriate debug to > verify whether or not One way audio instances are prevalent for HQ Phones. > Only provide the appropriate debug instance together with an explanation > highlighting your response to Management in no less than 50 words in a text > file titled MGCP.txt on the User PC?s desktop. > > can anyone say how to solve > this!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > shit again missed 3 time > > thanks > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20111211/a970c62e/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Mon, 12 Dec 2011 01:58:22 +0400 > From: "Mohammed Al Baqari" <baqari.voic...@gmail.com> > To: "'datucha123 datucha123'" <datucha...@gmail.com>, "'Ken Wyan'" > <kew...@gmail.com> > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] srst behaviour under telephony-service > Message-ID: <009001ccb850$02ac9120$0805b360$@gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Hi Ken, > > > > The main concerns with autoprovision all mode are: > > > > 1. Call Routing: A main concern when using predefined DNs or srst > autoprovision all/dn modes is call routing. In non-fallback mode, when the > call reaches the gateway (e.g. PSTN call) it should be routed to CUCM which > won't happen due to the fact the dial-peers are existing in CME-SRST router > (assuming that the gateway is connected to CUCM using H323/SIP trunks). > This > can be overcomed using higher preference dial-peers or using srst > autoprovision none mode. > > 2. Some abnormal behaviors have be observed when the phones fallback > to CME-SRST and then register with CUCM. The phone aren't registering with > CUCM and instead they re-register with CME due to some caching in the > phones. The solution for this is to restore phone factory. If none mode is > used, the phones won't register with CME and they will be forced to go back > to CUCM > > > > Now which fallback mode to use that depends on the requirement as Datucha > said. > > > > Regards, > > Mohammed Al Baqari > > > > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of datucha123 > datucha123 > Sent: Sunday, December 11, 2011 9:26 PM > To: Ken Wyan > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] srst behaviour under telephony-service > > > > Well it depends which features are you going to retain. > > > > For instance, if you are going to use the hardware conference resources in > SRST mode, for cBarge for example, then you have to configure the > auto-provision mode DN at least, so that you will be able to configure the > Ad-Hoc DNs. > > > > > > > > On Sun, Dec 11, 2011 at 5:59 PM, Ken Wyan <kew...@gmail.com> wrote: > > Hi Peers, > > > > I went through Vik's srst video & cisco docs for CME as srst & did some > testing to fully understand the differences of srst mode auto provision > all > | none | dn. ( Everybody knows basic difference is whether it saves > learned details in running config or not ; my concern is not that ) > > > > Cisco doc encourage to use auto provision none command ( & don't explain > much on other options ) & with that we can manually configure ephones & > ephone-dn s -----> but when phones register with srst , it reads only > ephone-dn configuration. Even if we configure an ephone with same > mac-address , it ignores it. ( My ephone with 2 buttons showed only 1 > button > after registration with srst ). I used CIPC & not sure is it a limitation > of > CIPC. > > > > It seems we can't use "srst mode auto provision none" to retain same > configuration & better to use "srst mode auto provision all" & manualy > configure ephone & ephone-dn s. ( or edit them to complete after they are > automatically created by first fall-back as Vik says). This seems working , > but not sure chances of creating duplicate entries by srst process in > later > fallback occurences. > > > > If I configure telephony-service ( with all ephones & ephone-dn s) without > any srst commands , can I get full fall-back functionality ( through srst > reference in CUCM ) . I know it works & phone reregister with CUCM when > link > comes up ; but I didn't find a cisco doc for such a redundancy option (for > configuration details). > > > > What will be the best option in Exam " if they ask to retain all features > of phones in srst mode " ? > > > > Thanks..... > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com <http://www.ipexpert.com/> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20111212/aa9321cc/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 70, Issue 89 > ****************************************** >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
