On an H323 GW use "debug h245 asn1" H.245 ASN1 Messages debugging is on SiteB-RTR# .Dec 17 02:38:53.994: H245 MSC OUTGOING PDU ::=
value MultimediaSystemControlMessage ::= indication : userInput : alphanumeric : "4" <<< DTMF 4 presses When using rtp-nte: .Dec 17 02:38:53.994: H245 MSC OUTGOING ENCODE BUFFER::= 6D400134 .Dec 17 02:38:53.998: On an MGCP gw use "debug mgcp packet" Dec 16 23:37:22.985: MGCP Packet sent to 10.10.210.11:2427---> NTFY 868796016 S0/SU0/DS1-0/1@SiteA-RTR MGCP 0.1 N: [email protected]:2427 X: 1 O: D/1 <<<<<<<<< DTMF "1" pressed <--- When RTP-NTE is being used: deb voip rtp session named-event (no example). Vik Malhi – CCIE #13890 Managing Partner - IPexpert, Inc. Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Mailto: [email protected] On Dec 14, 2011, at 8:29 AM, brajesh kumaR wrote: > Use debug voip ccapi inout and look for "digit= " to verify DTMF digits sent. > > You can debug this live on gateway and verify any DTMF digits entered > in between. > > On Fri, Dec 9, 2011 at 12:38 PM, So Gwaai <[email protected]> wrote: >> Anyone know how to verify the voice gateway send the dtmf through the PRI >> port? Any debug command or ccm trace we can get? >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
