Can to telnet to the loopback of HQ-RTR; from you laptop?

Also, What configs did you load?

-Chase

------------------------------------------------------------------------------------------------------
If winners never quit and quitters never win, then who coined the phrase, "Quit 
while you’re still ahead."?



 

Date: Sun, 12 Feb 2012 18:56:00 -0400
Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
From: juancarlosanz...@gmail.com
To: cm3_...@hotmail.com
CC: ccie_voice@onlinestudylist.com

Hi chase, 

   This is a ping from HQ-Router to my laptop

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

HQ-RTR#ping 192.168.10.15 repeat 50

Type escape sequence to abort.
Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds:
!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.!
Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms


--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------





On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola 
<juancarlosanz...@gmail.com> wrote:

Hi chase,

   No, i can't 

Regards,


On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal <cm3_...@hotmail.com> wrote:






Other than ICMP, can you access the IOS device and App servers ?

-Chase

------------------------------------------------------------------------------------------------------
If winners never quit and quitters never win, then who coined the phrase, "Quit 
while you’re still ahead."?



 

Date: Sun, 12 Feb 2012 18:03:15 -0400
From: juancarlosanz...@gmail.com
To: ccie_voice@onlinestudylist.com


Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue

Hi Folks,

    I am new to proctorlabs, today scheduled my first session, configured my 
2811 Home Router and started with the basic connectivity configurations. After 
testing connectivity within the pod, i did the same from my HomeRouter and 
Laptop. 




The weird thing is that from my HomeRouter i can ping every interface within 
the pod, but from my Laptop i issued Pings to different IP addresses and had 25 
to 50% successfull replies. I tried with online support and they told me it was 
not the POD.




Attached to this mail is my Router config.

Any advice?


Regards,


-- 
Juan Carlos Anzola


_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com                                         


-- 
Juan Carlos Anzola



-- 
Juan Carlos Anzola
                                          
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to