There a couple things you can do....
1.) in Telephoney-services add the following:
secondary dialtone 9
timeout interdigit 5
2.) you dial-peer should look similar to this.
Dial-peer voice 55 pots
Destination-pattern 9[1-9].......$
Port 0/3/0:15
The first sets the interdigit timeout to 5 sec so it quites looking for more
digits after 5 seconds.
The second explicitly states to route any call beginning with a secondary
dialtone of 9 and followed by any 8 digits not beginning with a zero (0).
This stops it from searching past 8 digits and sends the call immediately and
it eliminates all of your 900T calls from matching the dial-peer too.
HTH
Rick Long
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
[email protected]
Sent: Tuesday, February 28, 2012 3:54 AM
To: [email protected]
Subject: CCIE_Voice Digest, Vol 72, Issue 148
Send CCIE_Voice mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific than "Re:
Contents of CCIE_Voice digest..."
Today's Topics:
1. Re: overlapping dial-plan (arun thomas)
2. Re: AAR with RSVP (Rynard Coetzee)
----------------------------------------------------------------------
Message: 1
Date: Tue, 28 Feb 2012 13:20:16 +0530
From: arun thomas <[email protected]>
To: AJ BG <[email protected]>
Cc: [email protected]
Subject: Re: [OSL | CCIE_Voice] overlapping dial-plan
Message-ID:
<cafyf57vfwrbyxxbzte0cp1q-r6shqhflxabnzehs8bfvnkp...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
Try timeout interdigit 4 on voice-port
On Feb 28, 2012 11:27 AM, "AJ BG" <[email protected]> wrote:
> Hello All,
>
> In the IOS gateway how would you solve an overlapping dial-plan issue
> between 8 digit European dialing with access code of 9 ?9??..?and
> international pattern ?900T?. Assuming that the LD plan that is given
> to you is 9 followed by 8digits.
>
> The router will send the call as soon as it has enough digits. Is
> there really anyway to achieve this, beside configure your LD as 9[1-9]??..
>
> Thanks,
>
> AJ
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120228/ca051bab/attachment-0001.html>
------------------------------
Message: 2
Date: Tue, 28 Feb 2012 08:56:11 +0000
From: Rynard Coetzee <[email protected]>
To: "[email protected]" <[email protected]>
Subject: Re: [OSL | CCIE_Voice] AAR with RSVP
Message-ID:
<97D19F256B859A48A6A93E8A9210E52A17AF9026@BYTESEXCH2K10N1.bytes.local>
Content-Type: text/plain; charset="us-ascii"
Below is the SDI trace from the CUCM ,it seems as if CUCM is invoking AAR
02/28/2012 00:39:32.455 CCM|StationD: (0056858) DEBUG whatToDo: line=1
calls=0 limit=4, busy=2. GCI=(2, 1088), PL=(5,
0).|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0020>
02/28/2012 00:39:32.455 CCM|StationD: (0056858) DEBUG whatToDo: busy
trigger not hit... send to open
appearance|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0020>
02/28/2012 00:39:32.455 CCM|StationD: (0056858) DEBUG- getLineRingSetting:
retVal=4.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.455 CCM|StationD: (0056858) DEBUG- saveRinger for:
ci=35152666, line=1, mode=2, precedence=5,
callPhase=5.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.455 CCM|StationD: (0056858) DEBUG- saveRinger:
ci=35152666, line=1, mode=2, precedence=5, callPhase=5,
modifier=0|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.455 CCM|StationD: (0056858) INFO sendCallAcceptReq: Try
to send StationLineCallAccept to cdpc=121
.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Significant><MASK::0020>
02/28/2012 00:39:32.455 CCM|StationD: (0056858) playRinger for:
ci=35152666.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) DEBUG- getLineRingSetting:
retVal=4.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) DEBUG- getLineRingSetting:
retVal=4.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) DEBUG- getLineRingSetting:
retVal=4.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.456 CCM|RegionsServer::MatchCapabilities -- kbps=8,
capACount=8,
capBCount=8|<CLID::StandAloneCluster><NID::10.10.210.11><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.456 CCM|RegionsServer - modeA =[0], modeB =[0],
preferredIpType
=[0]|<CLID::StandAloneCluster><NID::10.10.210.11><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.456 CCM|Locations_reserveBandwidth -- cdccPID=(2.174.88)
Dest=3 not enough bw. bw=24 curr=23
max=23|<CLID::StandAloneCluster><NID::10.10.210.11><LVL::State
Transition><MASK::0800>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) DEBUG- star_DSetCallState(0)
State of cdpc(121) is
0.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,41,121.1><IP::><DEV::><LVL::Detailed><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) DEBUG- star_DSetCallPhase
updateACall=35152666 from Phase=5 to
callPhase=3.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Significant><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) DEBUG-
star_DSetCallState(15) State of cdpc(121) is
0.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) restart0_DStopInd: No Linked
StationCdpc.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Significant><MASK::ffffff>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) INFO restart0_DStopInd:
Enable NewCall on line=1 limit=4
listSize=0|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Significant><MASK::0020>
02/28/2012 00:39:32.456 CCM|StationD: (0056858) restart0_DStopInd: DEBUG:
StationCdpc(121) removed. Calltable contains 0
calls.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Significant><MASK::ffffff>
02/28/2012 00:39:32.459 CCM|LineCdpc(121)dispatchKeyReleaseReq - mDevicePid(0,
0, 0); mSelectedDPid(0, 0, 0), mOnBehalfOf(),
rfr(0)|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|StationD: (0056858) SetRinger
ringMode=1(RingOff).|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.459 CCM|deleteCi: Unable to find the device that owns the
call with
CI=|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|LineControl(42) - Release call instance=1 for
CI=35152666|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459
CCM|LineControl::sendSNFNotifyIndForPresenceWithAlerting
mPrecenceWithAlertingChangeNotifySubscribed=0,
calllist#=0|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|LineControl (42) - DStopInd - Line become
idle|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|LineControl(42) - 0 calls, 0 CiReq, busyTrigger=2,
maxCall=4|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|AAR invoked: cgpn = "2001" cdpn = "4001" prefix
digits = "" alternate num = "+442077964001" AAR CSS=
"1498d745-ea8f-a5e8-c2c2-7fdc6dbd66b3" cdcc=88,
mAARHopCount=1|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit Analysis: wait_DaReq:
daReq.partitionSearchSpace(1498d745-ea8f-a5e8-c2c2-7fdc6dbd66b3),
filteredPartitionSearchSpaceString(pt-aar),
partitionSearchSpaceString(pt-aar)|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit Analysis: wait_DaReq: Matching Legacy
Numeric,
digits=+442077964001|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Arbitrary><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit Analysis: getDaRes -
voiceMailCallingSearchSpace=[pt-internal:pt-nanp-911]|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit analysis: match(pi="1", fqcn="+12025552001",
cn="2001",plv="5", pss="pt-aar", TodFilteredPss="pt-aar",
dd="+442077964001",dac="0")|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit analysis: analysis
results|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0800>
02/28/2012 00:39:32.459 CCM||PretransformCallingPartyNumber=2001
|CallingPartyNumber=+12025552001
|DialingPartition=pt-aar
|DialingPattern=\+.44!
|FullyQualifiedCalledPartyNumber=+442077964001
|DialingPatternRegularExpression=(+)(44[0-9]+)
|DialingWhere=
|PatternType=Enterprise
|PotentialMatches=NoPotentialMatchesExist
|DialingSdlProcessId=(0,0,0)
|PretransformDigitString=+442077964001
|PretransformTagsList=ACCESS-CODE:SUBSCRIBER
|PretransformPositionalMatchList=+:442077964001
|CollectedDigits=011442077964001
|UnconsumedDigits=
|TagsList=SUBSCRIBER
|PositionalMatchList=442077964001
|VoiceMailbox=4001
|VoiceMailCallingSearchSpace=pt-internal:pt-nanp-911
|VoiceMailPilotNumber=2500
|RouteBlockFlag=RouteThisPattern
|RouteBlockCause=0
|AlertingName=
|UnicodeDisplayName=
|DisplayNameLocale=1
|InterceptPartition=
|InterceptPattern=
|InterceptWhere=
|InterceptSdlProcessId=(0,0,0)
|InterceptSsType=0
|InterceptSsKey=0
|InterceptSsNotifyType=0
|OverlapSendingFlagEnabled=0
|WithTags=
|WithValues=
|CallingPartyNumberPi=NotSelected
|ConnectedPartyNumberPi=NotSelected
|CallingPartyNamePi=NotSelected
|ConnectedPartyNamePi=NotSelected
|CallManagerDeviceType=NoDeviceType
|PatternPrecedenceLevel=Routine
|CallableEndPointName=[78c39416-b38a-1ac4-ebf8-37ab2a23f020]
|PatternNodeId=[fc53513f-2ab4-e40a-bb3c-afe0ee127a34]
|AARNeighborhood=[]
|AARDestinationMask=[]
|AARKeepCallHistory=true
|AARVoiceMailEnabled=false
|NetworkLocation=OffNet
|Calling Party Number Type=Subscriber
|Calling Party Numbering Plan=ISDNTelephony Called Party Number
|Type=International Called Party Numbering Plan=ISDNTelephony
|ProvideOutsideDialtone=true AllowDeviceOverride=false AlternateMatches=
|Information Not Available TranslationPatternDetails= Information Not
|Available
|ResourcePriorityNamespace=|<CLID::StandAloneCluster><NID::10.10.210.11>
|<CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::S
|tate Transition><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit analysis: insert daResEntry to daResCache.
KeyCi=35152665
,PID:Cdcc(2,174,88)|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Arbitrary><MASK::0800>
02/28/2012 00:39:32.459 CCM|Digit analysis: callableEPName
[78c39416-b38a-1ac4-ebf8-37ab2a23f020] sent to device
manager|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Arbitrary><MASK::0800>
02/28/2012 00:39:32.460 CCM|LineCdpc(120): -dispatchToAllDevices-,
sigName=CcNotifyReq,
device=SEPFCFBFBCB5FDA|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::0800>
02/28/2012 00:39:32.460 CCM|star_CcNotifyReq - bmask=0x100000
displayName.length=30 (Network Congestion.
Rerouting.).|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.460 CCM|StationD: (0056860) DisplayNotify
timeOutValue=10 notify='Network Congestion. Rerouting.' content='Network
Congestion. Rerouting.'
ver=85720011.|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.460 CCM|StationD: (0056860) StationOutputDisplayText
don't need to send, because mIsALegacyDevice =
0|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::State
Transition><MASK::0020>
02/28/2012 00:39:32.460 CCM|SMDMSharedData::findAliasRegInfo - AliasName =
78c39416-b38a-1ac4-ebf8-37ab2a23f020 not in AliasInfo
hashmap|<CLID::StandAloneCluster><NID::10.10.210.11><CT::2,100,39,1.184725><IP::10.10.200.129><DEV::SEPFCFBFBCB5FDA><LVL::Detailed><MASK::ffffff>
02/28/2012 00:39:32.460 CCM|DeviceManager::star_DmPidReq -
RequestedName=78c39416-b38a-1ac4-ebf8-37ab2a23f020 Lookup
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
[email protected]
Sent: 28 February 2012 08:57 AM
To: [email protected]
Subject: CCIE_Voice Digest, Vol 72, Issue 147
Send CCIE_Voice mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific than "Re:
Contents of CCIE_Voice digest..."
Today's Topics:
1. Re: AAR with RSVP (Rynard Coetzee)
2. Re: overlapping dial-plan (Juan Lopez)
3. Re: AAR with RSVP (Rynard Coetzee)
----------------------------------------------------------------------
Message: 1
Date: Tue, 28 Feb 2012 06:53:53 +0000
From: Rynard Coetzee <[email protected]>
To: A A <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [OSL | CCIE_Voice] AAR with RSVP
Message-ID:
<97D19F256B859A48A6A93E8A9210E52A17AF8FBB@BYTESEXCH2K10N1.bytes.local>
Content-Type: text/plain; charset="us-ascii"
Hi
Yes I have it configured ,I also tried configuring the AAR mask under the line
,but still same issue
From: A A [mailto:[email protected]]
Sent: 28 February 2012 03:41 AM
To: Rynard Coetzee
Subject: Re: [OSL | CCIE_Voice] AAR with RSVP
do you have external mask configured ?
On Feb 27, 2012 3:53 AM, "Rynard Coetzee"
<[email protected]<mailto:[email protected]>> wrote:
Hi All
I have a issue where my AAR is not working from HQ site to BR2 site ,I have
configured the RSVP agent and tested it ,working 100% ,I also have AAR group
,and AAR RP configured and also assigned AAR CSS to phones ,the group is also
configured under the line. I have also enabled AAR under service params ,when I
disable the RSVP agent to force the call via the PSTN ,I see the "Network
Congestion, Rerouting" text on the phone ,but I get a fastbusy ,and also
running debugs on the HQ GW ,I don`t see the call hitting the GW.
Not sure what I am missing here ,I also tried disabling the RSVP completely and
using Location B/Width at 23K ,but same result ?
Any ideas ?
Regards
Rynard
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com<http://www.ipexpert.com>
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120228/f6aea8c6/attachment-0001.html>
------------------------------
Message: 2
Date: Tue, 28 Feb 2012 07:51:23 +0100
From: Juan Lopez <[email protected]>
To: AJ BG <[email protected]>
Cc: [email protected]
Subject: Re: [OSL | CCIE_Voice] overlapping dial-plan
Message-ID:
<CANpj6cwycc1WFSEvBq0T+o_kyQwz08La=k6h7-twy2fnv+8...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
hi AJ,
there is only an issue if that IOS is also capturing digits in digit-by-digit
style - which would be the case if it runs CME or SRST with SCCP phones (for
SIP phones you can use sip dial rules to turn off KPML). So only then you must
make a distinction between LD and INTL dialpeers, aka/ be more specific in your
LD dialpeer.
If this IOS router only recieves digits en-bloc (aka it's a TDM GW only running
h323 or SIP) then in fact there is no issue. LD calls will only match the
9........ and INTNL calls will match the 900T dialpeer.
greets,
Juan
2012/2/28 AJ BG <[email protected]>
> Hello All,
>
> In the IOS gateway how would you solve an overlapping dial-plan issue
> between 8 digit European dialing with access code of 9 ?9??..?and
> international pattern ?900T?. Assuming that the LD plan that is given
> to you is 9 followed by 8digits.
>
> The router will send the call as soon as it has enough digits. Is
> there really anyway to achieve this, beside configure your LD as 9[1-9]??..
>
> Thanks,
>
> AJ
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com <http://www.platinumplacement.com/>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120228/73f5f11a/attachment-0001.html>
------------------------------
Message: 3
Date: Tue, 28 Feb 2012 06:58:58 +0000
From: Rynard Coetzee <[email protected]>
To: "[email protected]" <[email protected]>
Subject: Re: [OSL | CCIE_Voice] AAR with RSVP
Message-ID:
<97D19F256B859A48A6A93E8A9210E52A17AF8FCE@BYTESEXCH2K10N1.bytes.local>
Content-Type: text/plain; charset="us-ascii"
Hi Bakta
External number mask on the line is full E.164 number (+442077964001) I have no
AAR prefix configured The route pattern I have is \+.442077964001 and this RP
is in a separate PT ,strange thing is I don`t see the call getting to the GW
when I do Q931 debug ,my RP is pointing to the Local RG.
Regards
Rynard
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
[email protected]
Sent: 28 February 2012 12:14 AM
To: [email protected]
Subject: CCIE_Voice Digest, Vol 72, Issue 145
Send CCIE_Voice mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific than "Re:
Contents of CCIE_Voice digest..."
Today's Topics:
1. Re: AAR with RSVP (Baktha Muralidharan)
2. Re: VXML on MGCP Gateway (Ricardo)
----------------------------------------------------------------------
Message: 1
Date: Mon, 27 Feb 2012 13:12:17 -0500
From: Baktha Muralidharan <[email protected]>
To: [email protected]
Subject: Re: [OSL | CCIE_Voice] AAR with RSVP
Message-ID:
<ca+ne39uue3a-fodeaxa0_qwcb6kogwzstmpxxc1hmzfvb10...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi Rynard
could you describe the following-
- External number mask on the line
- AAR prefix
- route pattern you have to route the AAR call
thanks,
/Baktha
>
> Today's Topics:
>
> 1. AAR with RSVP (Rynard Coetzee)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 27 Feb 2012 11:40:53 +0000
> From: Rynard Coetzee <[email protected]>
> To: "[email protected]" <[email protected]>
> Subject: [OSL | CCIE_Voice] AAR with RSVP
> Message-ID:
>
>
> <97D19F256B859A48A6A93E8A9210E52A17AF8F5A@BYTESEXCH2K10N1.bytes.local>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi All
> I have a issue where my AAR is not working from HQ site to BR2 site ,I
> have configured the RSVP agent and tested it ,working 100% ,I also
> have AAR group ,and AAR RP configured and also assigned AAR CSS to
> phones ,the group is also configured under the line. I have also
> enabled AAR under service params ,when I disable the RSVP agent to
> force the call via the PSTN ,I see the "Network Congestion, Rerouting"
> text on the phone ,but I get a fastbusy ,and also running debugs on the HQ GW
> ,I don`t see the call hitting the GW.
> Not sure what I am missing here ,I also tried disabling the RSVP
> completely and using Location B/Width at 23K ,but same result ?
> Any ideas ?
> Regards
> Rynard
>
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120227/6070bb52/attachment-0001.ht
> ml>
>
> ------------------------------
>
> _______________________________________________
> CCIE_Voice mailing list
> [email protected]
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
>
>
> End of CCIE_Voice Digest, Vol 72, Issue 144
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120227/034cc8c0/attachment-0001.html>
------------------------------
Message: 2
Date: Mon, 27 Feb 2012 17:14:19 -0500
From: Ricardo <[email protected]>
To: anuj thapa <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [OSL | CCIE_Voice] VXML on MGCP Gateway
Message-ID:
<cajzgwy2w53ectc+v7ai7wvvxxnh9oizqxf43qkfv4grqyyx...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Thanks Brother... I had already seen those docs but honestly it's all greek to
me, i know tcl but ( v ) xml is another story.
As soon as I finish another project, I will start working more with VXML, if I
find the answer I will post it
Regards
//r.a.
On Thu, Feb 23, 2012 at 7:24 PM, anuj thapa <[email protected]> wrote:
>
> I have no experience in doing this but once upon a time I was also
> looking for this and I had an old bookmark that could be helpful ( you
> might have already come across it.)
>
>
> http://www.cisco.com/en/US/docs/ios/voice/ivr/configuration/guide/ivra
> ppb.html#wpxref17121
> http://www.cisco.com/en/US/docs/ios/voice/vxml/developer/guide/refgde3
> .html
>
> Ps. Your skills need to be TCL aware
>
> ------------------------------
> *From:* "[email protected]" <
> [email protected]>
> *To:* [email protected]
> *Sent:* Wednesday, 22 February 2012 10:47 PM
> *Subject:* CCIE_Voice Digest, Vol 72, Issue 127
>
> Send CCIE_Voice mailing list submissions to
> [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> [email protected]
>
> You can reach the person managing the list at
> [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
> 1. Re: VXML on MGCP Gateways (Ricardo)
> 2. Re: srst softkeys (Jonathan Charles)
> 3. Re: LAN QoS, cBarge in CME SRST (Baktha Muralidharan)
> 4. Re: cBarge in CME SRST (Rynard Coetzee)
> 5. When does IPMA route point show as registered? (Anthony Alba)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 22 Feb 2012 12:00:04 -0500
> From: Ricardo <[email protected]>
> To: [email protected]
> Cc: [email protected]
> Subject: Re: [OSL | CCIE_Voice] VXML on MGCP Gateways
> Message-ID:
>
> <CAJzGwY2yh4xZ+oA-gV__6GZWA=138x5BYmYGc40CYs7KBSwO=g...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Yes Peter, I have done all those options and they all work.
>
> I just want to know how to configure VXML on MGCP, I have seen several
> comments that it can be done, but nobody seems to know how to do it,
> and there is no clear documentation about it in Cisco web page
>
> I think this could come in handy, and a good trick up our sleeves.
>
> Regards
>
> //r.a.
>
> 2012/2/22 "Farkas P?ter" <[email protected]>
>
> > I am not familiar with VXML but you may do it as configuring the
> > gateway being also as a H323 gw and send the call back to it from
> > CUCM. You set
> up
> > a dial-peer for incoming h323 call and enable bacd on it.
> >
> > Also if you have CU or CUC than it can do it for you.
> >
> > Peter
> > ----- Original Message -----
> > From: Ricardo <[email protected]>
> > Date: Wednesday, February 22, 2012 3:51 pm
> > Subject: [OSL | CCIE_Voice] VXML on MGCP Gateways
> > To: [email protected]
> >
> >
> > > Hi Guys,
> > >
> > > I am doing a lab thinking out of the box... what if we want to
> > > set a
> > b-acd
> > > tcl-like but for a gateway running MGCP, so a message is played
> > > before sending to receptionist or . I know TCL doesn't work with
> > > MGCP, but
> VXML
> > > does... do you have any idea how to set it up?
> > >
> > > best regards
> > >
> > > //r.a.
> > > _______________________________________________
> > > For more information regarding industry leading CCIE Lab
> > > training,
> > please visit www.ipexpert.com
> > >
> > > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
> >
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120222/c24037af/attachment-0001.ht
> ml>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 22 Feb 2012 11:07:05 -0600
> From: Jonathan Charles <[email protected]>
> To: Ken Wyan <[email protected]>
> Cc: [email protected]
> Subject: Re: [OSL | CCIE_Voice] srst softkeys
> Message-ID:
>
> <caplpvzifwmgo+-ujb2-azldzs35rwekm8w4_u1_vqe3mlhu...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Has a recent call been made?
>
> Redial will be dimmed if there are no calls to redial...
>
>
> Jonathan
>
> On Wed, Feb 22, 2012 at 10:16 AM, Ken Wyan <[email protected]> wrote:
>
> > I configured srst ( using telephony-service) .
> >
> > When phones are in fallback mode Redial softkey is dimmed on 7965 phones.
> >
> > As per cisco docs , only unsupported softkeys are dimmed in srst mode.
> >
> > Is this normal or can be any mistake?
> >
> > Ken
> >
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training,
> > please visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
> >
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120222/16c7858c/attachment-0001.ht
> ml>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 22 Feb 2012 12:29:23 -0500
> From: Baktha Muralidharan <[email protected]>
> To: [email protected]
> Subject: Re: [OSL | CCIE_Voice] LAN QoS, cBarge in CME SRST
> Message-ID:
>
> <ca+ne39wyazxle+mxgqyv72zwxsokvdn36uy6usze-krmf8t...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> If nothing specific is required for traffic from/to the phones, I
> would not do anything there.
> Run the auto qos on an unused port.
>
> Thanks,
> /Baktha
>
>
> > --------------------------------------------------------------------
> > --
> >
> > Message: 1
> > Date: Wed, 22 Feb 2012 02:13:29 -0800 (PST)
> > From: Vega Wong <[email protected]>
> > To: [email protected]
> > Subject: [OSL | CCIE_Voice] LAN QoS
> > Message-ID:
> >
> > <[email protected]>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hi all
> >
> > Just want to get some advise regarding LAN QoS.
> >
> > Let say if the question ask to apply priority queue and specify
> > certain drop % based on a COS value to the interface that connect to the
> > router.
> > What would you do with the interface that connecting to the phone?
> >
> > The reason I asked is because if auto-qos is used on the phone
> > ports, a few config line will be generated, such as policy map etc.
> > Do you
> normally
> > leave those in there on the phone ports?
> >
> > Cheers
> >
> > Vega
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL:
> > </archives/ccie_voice/attachments/20120222/4edd7d04/attachment-0001.
> > html>
> >
> >
> Pls make sure you have configured the ephone-dns to be octo-line
>
> thanks,
> /Baktha
>
> ------------------------------
> >
> > Message: 2
> > Date: Wed, 22 Feb 2012 12:35:57 +0000
> > From: Rynard Coetzee <[email protected]>
> > To: "[email protected]"
> > <[email protected]>
> > Subject: [OSL | CCIE_Voice] cBarge in CME SRST
> > Message-ID:
> >
> >
> > <97d19f256b859a48a6a93e8a9210e52a17af8...@bytesexch2k10n1.bytes.loca
> > l>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Hi All
> > I have an issue to get the cBarge to work when my H323 GW goes into
> > SRST ,the shared line shows up on both phones ,but when I have an
> > active call
> on
> > one phone ,I don`t see the number on the other phone ,and the other
> > phone does not go into remote in use state when I press the shared
> > line
> button. I
> > have privacy turned off under the ephones and also under the
> > telephony service. Also my CFB is registered to the router when in
> > srst mode ,I am able to make a normal ad-hoc conference when in srst mode.
> > Any ideas ?
> > Regards
> > Rynard
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL:
> > </archives/ccie_voice/attachments/20120222/4065d064/attachment-0001.
> > html>
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Wed, 22 Feb 2012 13:58:15 +0100
> > From: "Farkas P?ter" <[email protected]>
> > To: Rynard Coetzee <[email protected]>
> > Cc: "[email protected]"
> > <[email protected]>
> > Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
> > Message-ID: <[email protected]>
> > Content-Type: text/plain; charset=us-ascii
> >
> > Have you tried to turn off privacy and enable remote-in-use sofktkey
> > through an ephone-template attached to the ephone? Privacy setting
> > on ephone has a bug in SRST mode.
> >
> > Peter
> > ----- Original Message -----
> > From: Rynard Coetzee <[email protected]>
> > Date: Wednesday, February 22, 2012 1:51 pm
> > Subject: [OSL | CCIE_Voice] cBarge in CME SRST
> > To: "[email protected]"
> > <[email protected]>
> >
> >
> > > Hi All
> > > I have an issue to get the cBarge to work when my H323 GW goes
> > > into
> > SRST ,the shared line
> > > shows up on both phones ,but when I have an active call on one
> > > phone ,I
> > don`t see the number on
> > > the other phone ,and the other phone does not go into remote in
> > > use
> > state when I press the
> > > shared line button. I have privacy turned off under the ephones
> > > and
> also
> > under the telephony
> > > service. Also my CFB is registered to the router when in srst mode
> > > ,I
> am
> > able to make a normal
> > > ad-hoc conference when in srst mode.
> > > Any ideas ?
> > > Regards
> > > Rynard
> > > _______________________________________________
> > > For more information regarding industry leading CCIE Lab
> > > training,
> > please visit www.ipexpert.com
> > >
> > > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
> >
> >
> > ********************************
> >
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120222/c9bea1f5/attachment-0001.ht
> ml>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 23 Feb 2012 06:03:06 +0000
> From: Rynard Coetzee <[email protected]>
> To: "[email protected]" <[email protected]>
> Cc: "[email protected]" <[email protected]>
> Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
> Message-ID:
>
> <97D19F256B859A48A6A93E8A9210E52A17AF8C26@BYTESEXCH2K10N1.bytes.local>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Yes I have tried it under the template and under the ephone.
>
> -----Original Message-----
> From: "Farkas P?ter" [mailto:[email protected]]
> Sent: 22 February 2012 02:58 PM
> To: Rynard Coetzee
> Cc: [email protected]
> Subject: Re: [OSL | CCIE_Voice] cBarge in CME SRST
>
> Have you tried to turn off privacy and enable remote-in-use sofktkey
> through an ephone-template attached to the ephone? Privacy setting on
> ephone has a bug in SRST mode.
>
> Peter
> ----- Original Message -----
> From: Rynard Coetzee <[email protected]>
> Date: Wednesday, February 22, 2012 1:51 pm
> Subject: [OSL | CCIE_Voice] cBarge in CME SRST
> To: "[email protected]" <[email protected]>
>
>
> > Hi All
> > I have an issue to get the cBarge to work when my H323 GW goes into
> > SRST ,the shared line shows up on both phones ,but when I have an
> > active call on one phone ,I don`t see the number on the other phone
> > ,and the other phone does not go into remote in use state when I
> > press the shared line button. I have privacy turned off under the
> > ephones and also under the telephony service. Also my CFB is
> > registered to the
> router when in srst mode ,I am able to make a normal ad-hoc conference
> when in srst mode.
> > Any ideas ?
> > Regards
> > Rynard
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training,
> > please visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 23 Feb 2012 14:47:31 +0800
> From: Anthony Alba <[email protected]>
> To: CCIE Study <[email protected]>
> Subject: [OSL | CCIE_Voice] When does IPMA route point show as
> registered?
> Message-ID:
>
> <CADkWibfDrCf-oHNHrvOvz5jX+-mjU=j91chpg1ervjvjym6...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I would like to build-up a step-by-step IPMA Proxy mode checklist and
> verification.
>
>
> If you configure the IPMA route point (with DN a superset of Managers'
> DNs like 5XXX), configure the IPMA Service Parameters on both Pub/Sub
> and restart he IPMA service, ought the IPMA route point appear as
> registered?
> (at this stage I have no Managers or Assistants configured)
>
> In my brief testing this usually doesn't happen (I suspect my VMs),
> but I would like to confirm whether the IPMA route point should appear
> registered or unregistered without any user configuration (yet).
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> </archives/ccie_voice/attachments/20120223/ef70f719/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> CCIE_Voice mailing list
> [email protected]
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
>
>
> End of CCIE_Voice Digest, Vol 72, Issue 127
> *******************************************
>
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120227/5abfe24f/attachment.html>
------------------------------
_______________________________________________
CCIE_Voice mailing list
[email protected]
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 72, Issue 145
*******************************************
------------------------------
_______________________________________________
CCIE_Voice mailing list
[email protected]
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 72, Issue 147
*******************************************
------------------------------
_______________________________________________
CCIE_Voice mailing list
[email protected]
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 72, Issue 148
*******************************************
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
