Hi Chris, 1. Make sure calls from BR1/BR2 to HQ are working properly. If so, then RSVP is working fine.2. Reset the xcoder in the CUCM and do no sccp/sccp in HQ GW. Thanks,Ramy
Date: Tue, 17 Apr 2012 18:17:24 +1000 From: [email protected] To: [email protected] Subject: [OSL | CCIE_Voice] UCCX and Media Resources My UCCX is in HQ device pool. The DP has MRGL allocated to with registered transcoder resources. However, when I try to dial from BR1/BR2. The call fails to connect. The SDI traces on the call manager show following messages: 04/17/2012 15:28:30.231 CCM|MediaManager(9)::disconnOnResourceAllocationFailure, ERROR disconnOnResourceAllocationFailure - fails to allocate MTP/XCoder,connCount=2|<CLID::StandAloneCluster><NID::10.10><IP::10.10.100.14><DEV::UCCX_5701><LVL::Error><MASK::0800> Xcoder resource is configured as Transcoding Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.10.100.12, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 1Reported Max Streams: 6, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 MTP Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.10.100.12, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 3Reported Max Streams: 20, Reported Max OOS Streams: 0 Supported Codec: pass-thru, Maximum Packetization Period: N/ASupported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30RSVP : ENABLED MRGL Can someone tell me what am I doing wrong. ThanksChris _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
<<attachment: image.png>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
