Can you send a copy of the CME config? Also, are the DN's Octo lines?
-Chase ------------------------------------------------------------------------------------------------------ If winners never quit and quitters never win, then who coined the phrase, "Quit while you’re still ahead."? From: jeff.mch...@att.net Date: Mon, 4 Jun 2012 15:55:52 -0400 To: vinayak_...@yahoo.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna <vinayak_...@yahoo.com> wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config???? sccp local FastEthernet0/0sccp ccm 10.50.5.1 identifier 1 version 7.0sccp!sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5!dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP!dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UPGateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000IP Precedence: 5User Masked Codec list: NoneCall Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 2Reported Max Streams: 48, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g711alaw, Maximum Packetization Period: 30Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 1Reported Max Streams: 32, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com