Randall is correct here.  UCM will always divert to the intra-region Service 
Parameter settings.  Change this to 729 and then hard code your codec between 
regions within the region parameters section.

Thanks,

Justin McIntyre
Engineer
Mutual Telecom Services Inc.
a wholly-owned subsidiary of Black Box Corp.
COMM: (434)-946-1562
DSN: (312)-237-1562
CELL: (540)-312-9391
FAX: (434)-946-1510




-----Original Message-----
Message: 6
Date: Thu, 14 Jun 2012 00:14:03 -0700
From: Rrcrumm <rrcr...@yahoo.com>
To: Krishna <vinayak_...@yahoo.com>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] Gatekeeper acting weird for codec
Message-ID: <0d193090-0965-4053-9d15-0a2d160ea...@yahoo.com>
Content-Type: text/plain; charset="us-ascii"

I think I remember some tone a k this situation.

You chance the setting is service parameters for intra region to g729

HTH
Randall

Sent from my iPhone

On Jun 13, 2012, at 9:10 PM, Krishna <vinayak_...@yahoo.com> wrote:

> Hi folks,
>
> I configured the gatekeeper on the Hq router, and when i call from hq to 
> br2(cme)  the call set up shows as 16 kbps, but whereas from cme to hq it 
> shows as 128 kbps but the actual call is connected with g729. Even after the 
> call got connected, it stills shows as 128 in the show gatekeeper call. here 
> is the output status:
>
> i put the gk-trunk in the hq region as well. any help is much appreciated on 
> this matter.
>
> BR2-RTR(config)#do sh voice call stat
> CallID     CID  ccVdb      Port             DSP/Ch  Called #   Codec    
> Dial-peers
> 0xC0       13B3 0x49DA073C 50/0/2.0                 95002      g729r8    
> 20002/15
> 1 active call found
>
> HQ-RTR(config-gk)#do sh gatek call
> Total number of active calls = 1.
>
> largest hash bucket = 1
>                          GATEKEEPER CALL INFO
>                          ====================
> LocalCallID                        Age(secs)   BW
> 62-42307            579            33          128(Kbps)
> ConferenceID                         CallID                               
> SrcCRV
> A5CF2B43 B52E11E1 81D2B06F 708A730B  A5CF2B43 B52E11E1 81D4B06F 708A730B  85
>  Endpt(s): Alias                 E.164Addr
>    src EP: BR2-RTR               3002
>            CallSignalAddr  Port  RASSignalAddr   Port
>            10.10.110.3     1820  10.10.110.3     62007
>  Endpt(s): Alias                 E.164Addr
>    dst EP: gk-trunk_1            95002
>            CallSignalAddr  Port  RASSignalAddr   Port
>            10.10.210.10    1720  10.10.210.10    32784
>         callstate: SEP, DEP,
>
>
> Thank you
>
> Krishna.
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20120614/7325e5c0/attachment.html>

------------------------------

_______________________________________________
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 76, Issue 42
******************************************

This email and any files transmitted with it are confidential and are intended 
for the sole use of the individual to whom they are addressed. Black Box 
Corporation reserves the right to scan all e-mail traffic for restricted 
content and to monitor all e-mail in general. If you are not the intended 
recipient or you have received this email in error, any use, dissemination or 
forwarding of this email is strictly prohibited. If you have received this 
email in error, please notify the sender by replying to this email.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to