With MVA using partial match only works some of the times from what I see. Takes alot of resetting and everything to get partial match to work. Thats why I always ended up doing Complete match and changing the number in service parameters to meet whatever the PSTN was sending. If it only sent 7 digits I changed it to 7, send 10 digits leave it at 10. Then if you have to do SNR create a whole separate partition, css, and route patern just for SNR.
The reason why i believe you are going staight to voicemail is because you're busy trigger is set to 1. So if you are calling from a remote destination of phone 3001 you are taking up that line calling in and since your busy trigger is at 1 it goes straight to voicemail as configured. Thanks Jason ----- Original Message ----- From: Krishna Sent: 08/29/12 01:19 AM To: Online Study Subject: Re: [OSL | CCIE_Voice] mva showing very strange behavior - never routing the calls to mobile hi folks... i encountered a very strange behavior with mva configuration... i configured mva for h323 site with number 3000, and in the service parameters i enable mva along with mva number, and as well as partial match and 7 digits... remote destination profile has mobile and mobile connect enabled, and the remote destination number is given as 98397263.... incoming call from pstn has 10 digit ani display i.e. 4088397263 ... 1.) first weird behavior : mva didn't recognizes this number, and prompts for enter the remote destination number 2.) call made from 2001 to 3001 only rings 3001 but no traces that it hits h323 gateway in routing the call to mobile number... i enabled both debug voip dialp and deb isdn q931 Now, i changed the remote destination number to 4088397263..then it recognizes this number and asks for pin... with the above configuration, here are the weird results.. when i call to 3001 from pstn phone, it sends the call directly to voicemail rather ringing the extension 3001,and the call is staying for 5 seconds then terminates itself automatically... i am completely lost when this happened.. and when i made the remote destination number to 98397263 it works fine i.e. the 3001 phone rings ... Did anyone experienced this type of behavior in your practice labs..???? any advice or help on this matter is much appreciated.. note: i placed mobile access partition in a different partition that only css of h323 gateway sees it, and also placed in null partition but no difference .. thank you krishna.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
