Hi all,
this question is not ccie lab related. I have 2911 integrated via sip to
cucm 8.6. When a call terminates because of user busy/unallocated number or
what ever, the cisco phone still rings for 30 seconds because the sip
disconnect message was send 30 seconds after pstn disconnect. How could I
reduce this timer?
*Aug 30 09:50:55.631: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type
0x12 is 0x2 0x1, Calling num 30210035294
*Aug 30 09:50:55.631: ISDN Se0/0/0:15 Q931: Sending SETUP callref = 0x0087
callID = 0x8008 switch = primary-net5 interface = User
*Aug 30 09:50:55.631: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref =
0x0087
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have
in-band info
Calling Party Number i = 0x2181, '30210035294'
Plan:ISDN, Type:National
Called Party Number i = 0x81, '030222225555'
Plan:ISDN, Type:Unknown
*Aug 30 09:50:55.631: //84/454699000000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 10.0.242.58:5060;branch=z9hG4bK384343afdac
From: <sip:[email protected]
>;tag=15397~2193bb14-5a60-4057-a1e8-d01a7c16325d-49442666
To: <sip:[email protected]>
Date: Thu, 30 Aug 2012 09:50:55 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M1
Content-Length: 0
*Aug 30 09:50:56.495: ISDN Se0/0/0:15 Q931: RX <- SETUP_ACK pd = 8 callref
= 0x8087
Channel ID i = 0xA9839F
Exclusive, Channel 31
*Aug 30 09:50:57.135: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8
callref = 0x8087
Cause i = 0x8283 - No route to destination
Facility i = 0x91A10802011F0201228100
Protocol Profile = Remote Operations Protocol
0xA10802011F0201228100
Component = Invoke component
Invoke Id = 31
Operation = AOCDChargingUnit
Progress Ind i = 0x8288 - In-band info or appropriate now available
*Aug 30 09:50:57.135: ISDN Se0/0/0:15 Q931: call_disc: PI received in
disconnect; Postpone sending RELEASE for callid 0x8008
*Aug 30 09:50:57.139: //84/454699000000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/TCP 10.0.242.58:5060;branch=z9hG4bK384343afdac
From: <sip:[email protected]
>;tag=15397~2193bb14-5a60-4057-a1e8-d01a7c16325d-49442666
To: <sip:[email protected]>;tag=CF900-858
Date: Thu, 30 Aug 2012 09:50:55 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE,
NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]
>;party=called;screen=no;privacy=off
Contact: <sip:[email protected]:5060;transport=tcp>
Supported: sdp-anat
Reason: Q.850;cause=3
Server: Cisco-SIPGateway/IOS-15.2.4.M1
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 256
v=0
o=CiscoSystemsSIP-GW-UserAgent 7858 2021 IN IP4 10.0.242.61
s=SIP Call
c=IN IP4 10.0.242.61
t=0 0
m=audio 16398 RTP/AVP 0 8 101
c=IN IP4 10.0.242.61
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
*Aug 30 09:51:37.203: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8 callref =
0x8087
Cause i = 0x8283 - No route to destination
Facility i = 0x91A10802011F0201228100
Protocol Profile = Remote Operations Protocol
0xA10802011F0201228100
Component = Invoke component
Invoke Id = 31
Operation = AOCDChargingUnit
*Aug 30 09:51:37.203: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0087
*Aug 30 09:51:37.227: //84/454699000000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 404 Not Found
Via: SIP/2.0/TCP 10.0.242.58:5060;branch=z9hG4bK384343afdac
From: <sip:[email protected]
>;tag=15397~2193bb14-5a60-4057-a1e8-d01a7c16325d-49442666
To: <sip:[email protected]>;tag=CF900-858
Date: Thu, 30 Aug 2012 09:50:55 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M1
Reason: Q.850;cause=3
Content-Length: 0
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
