Dear Pavan,
Thanks for your feedback,But my question is even if i implement cor still I
can't control that because I can't control what customer A and B and in that
case if customer A sent me the call with ANI for cutomer B then customer B
dial-peer will be match and the call will not be blocked.
but during my google search I found some greating feature which is incoming uri
based on the IP so anybody working in that feature ????
________________________________
From: Pavan <[email protected]>
To: John John <[email protected]>
Cc: "[email protected]" <[email protected]>
Sent: Friday, September 14, 2012 6:43 AM
Subject: Re: [OSL | CCIE_Voice] sip trunk
I think cor can offer a good solution for this. Assign a separate cor group to
each dialpeer say cust1 and cust2 in both inbound and outbound directions
-Pavan
On Sep 13, 2012, at 17:45, John John <[email protected]> wrote:
Dear All,
>
> We have two sipt trunk for 2 comapany:-
>
>company A - DID range 332211XX
>Company B - DID range 332222XX
>
>and each company has own PBX,Company A has AVAYA and company B has cisco Call
>manager.
>
>and they have sip trunk to my gateway where is the E1 is connected.
>
>in my gateway there is two dial peer :
>
>dial-peer voice 1 voip
> description ## Customer-A ##
> answer-address 332211..
> destination-pattern 332211..
> modem passthrough nse codec g711ulaw
> session protocol sipv2
> session target ipv4:192.168.10.10
>
>dial-peer voice 2 voip
> description ## Customer-B
##
> answer-address 332222..
> destination-pattern 332222..
> modem passthrough nse codec g711ulaw
> session protocol sipv2
> session target ipv4:192.168.20.10
>
>
>So in my case if customer A send me the ANI as 33222222 which is for customer
>B then the call will hit dial-peer 2 and the call will go outside with
>33222222 as the ANI number so how we can block Site A calls if they didn't use
>there own DID.
>
>
>
>
_______________________________________________
>For more information regarding industry leading CCIE Lab training, please
>visit http://www.ipexpert.com/
>
>Are you a CCNP or CCIE and looking for a job? Check out
>http://www.platinumplacement.com/
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
