Nic, Are you using the proctor labs rack? I hit something like this when using proctor labs. I don't have the interface in front of me but I believe I had to erase the config on the devices before loading the configs for the specific lab scenario. If I didn't erase the configs, the "loading" option merely merged configurations. Erasing the configs does a "wr erase" first and the loading of the lab scenario is good to go.
You can check by doing a "sho ver" and look at the uptime. HTH. -Bill -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Dec 12, 2012, at 3:54 AM, Nicolas MICHEL wrote: > Hey Guys ! > > Finally got some time to focus on the CCIE. > > I got a little question regarding Lab1 Vol2. > > Question 1.2: They are asking us to ensure that BR1 Phones that are > physically attached are getting IP/TFTP etc from the BR1 Router. > > My question is that I loaded the config and had nothing to do :( it was > already correct . The solution guide show some configuration regarding DHCP > Pools and VLAN assignement + SVI down but in my case the config were good as > I loaded the rack .... > > :( > > > Thanks for the help guys ! > > Nic > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
