Hi Will and thanks !
Quite annyoing when you are labbing on your own and expect to search for
something that do not come !
Bill Lake also adviced to do WR ERase .
I ll just do that :)
Thanks again !
Nic
Le 12/12/2012 6:04 PM, William Bell a écrit :
Nic,
Are you using the proctor labs rack? I hit something like this when
using proctor labs. I don't have the interface in front of me but I
believe I had to erase the config on the devices before loading the
configs for the specific lab scenario. If I didn't erase the configs,
the "loading" option merely merged configurations. Erasing the configs
does a "wr erase" first and the loading of the lab scenario is good to go.
You can check by doing a "sho ver" and look at the uptime.
HTH.
-Bill
--
William Bell
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Dec 12, 2012, at 3:54 AM, Nicolas MICHEL wrote:
Hey Guys !
Finally got some time to focus on the CCIE.
I got a little question regarding Lab1 Vol2.
Question 1.2: They are asking us to ensure that BR1 Phones that are
physically attached are getting IP/TFTP etc from the BR1 Router.
My question is that I loaded the config and had nothing to do :( it
was already correct . The solution guide show some configuration
regarding DHCP Pools and VLAN assignement + SVI down but in my case
the config were good as I loaded the rack ....
:(
Thanks for the help guys !
Nic
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com <http://www.ipexpert.com>
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com <http://www.PlatinumPlacement.com>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
