Hey guys.
I m in trouble with the phone connected to Fa1/0/23 of the 3750 in HQ.
Vlan assignement are OK:
HQ-3750#sh run int fa1/0/23
Building configuration...
Current configuration : 113 bytes
!
interface FastEthernet1/0/23
switchport access vlan 10
switchport voice vlan 20
spanning-tree portfast
end
HQ-3750#sh run int fa1/0/1
Building configuration...
Current configuration : 153 bytes
!
interface FastEthernet1/0/1
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport mode trunk
speed 100
duplex full
end
HQ-3750#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa1/0/1 on 802.1q trunking 10
Port Vlans allowed on trunk
Fa1/0/1 1-4094
Port Vlans allowed and active in management domain
Fa1/0/1 1,10,20,30
Port Vlans in spanning tree forwarding state and not pruned
Fa1/0/1 1,10,20,30
IP HELPER on the L3 Device is OK
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 10.10.200.3 255.255.255.0
ip helper-address 10.10.210.10
end
IP Phone can get an IP from the PUB (10.10.210.10)
HQ-3750#sh cdp neigh fa1/0/23 det
-------------------------
Device ID: SEP0021A086825D
Entry address(es):
IP address: 10.10.200.50
Platform: Cisco IP Phone 7962, Capabilities: Host Phone
Interface: FastEthernet1/0/23, Port ID (outgoing port): Port 1
Holdtime : 178 sec
Version :
SCCP42.8-4-1S
advertisement version: 2
Duplex: full
Power drawn: 6.300 Watts
Power request id: 33373, Power management id: 1
Power request levels are:6300 0 0 0 0
Management address(es):
the DHCP subnet is identical (except the IP range of course :) ) to the
others DHCP pool which other phone use and can register to CUCM...
I have no idea what is the problem here since it is a very basic problem
....
if anyone has experienced the same on POD 11 of PL ?
Many thanks for your help on this
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
