Hey Guys !
I feel like I am doomed :D
When I am calling 911/9911 from HQ, the calls fails.
It makes the PSTN phones ring and then it automagically disconnect the call.
ISDN Q931 debugs says that the requested circuit is not available, I
have tried isdn bchan ascending and descending order but with NO luck :(
The problem is that the incoming calls from the PSTN on both channel (1
and 3 => Fractionnal PRI) are working properly :D
If anyone has an idea I would be glad to hear it :D
Thanks !!
Nic !!
HQ-RTR#
HQ-RTR#
HQ-RTR#
HQ-RTR#
*Jan 9 08:58:55.739: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
*Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: Applying typeplan for
sw-type 0xD is 0x2 0x1, Calling num 2123945002
*Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: Applying typeplan for
sw-type 0xD is 0x0 0x0, Called num 911
*Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref =
0x0081
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98383
Exclusive, Channel 3
Calling Party Number i = 0x2181, '2123945002'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '911'
Plan:Unknown, Type:Unknown
*Jan 9 08:58:55.775: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8
callref = 0x8081
Channel ID i = 0xA98383
Exclusive, Channel 3
*Jan 9 08:58:55.787: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8
callref = 0x8081
Pro
HQ-RTR#gress Ind i = 0x8188 - In-band info or appropriate now available
*Jan 9 08:58:55.831: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x0081
Cause i = 0x80AC - Requested circuit/channel not available
*Jan 9 08:58:55.843: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref
= 0x8081
*Jan 9 08:58:55.847: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0081
HQ-RTR#
HQ-RTR#
HQ-RTR#
HQ-RTR#config t
Enter configuration commands, one per line. End with CNTL/Z.
HQ-RTR(config)#int s0/0/0:23
HQ-RTR(config-if)#isdn bchan as
HQ-RTR(config-if)#
*Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
*Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: Applying typeplan for
sw-type 0xD is 0x2 0x1, Calling num 2123945002
*Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: Applying typeplan for
sw-type 0xD is 0x0 0x0, Called num 911
*Jan 9 08:59:26.135: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref =
0x0082
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2181, '2123945002'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '911'
Plan:Unknown, Type:Unknown
*Jan 9 08:59:26.171: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8
callref = 0x8082
Channel ID i = 0xA98381
Exclusive, Channel 1
*Jan 9 08:59:26.179: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8
callref = 0x8082
Pro
HQ-RTR(config-gress Ind i = 0x8188 - In-band info or appropriate now
available
*Jan 9 08:59:26.223: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x0082
Cause i = 0x80AC - Requested circuit/channel not available
*Jan 9 08:59:26.231: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref
= 0x8082
*Jan 9 08:59:26.235: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0082if)#
HQ-RTR(config-if)#
*Jan 9 08:59:43.227: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref =
0x0084
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8583 - Origination address is non-ISDN
Display i = 'Emergency Services'
Calling Party Number i = 0x0080, '911'
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA1, '2123945002'
Plan:ISDN, Type:National
*Jan 9 08:59:43.251: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8
callref = 0x8084
Channel ID i = 0xA98381
Exclusive, Channel 1
HQ-RTR(config-if)#
*Jan 9 08:59:43.267: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8
callref = 0x8084
*Jan 9 08:59:44.191: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8
callref = 0x0084
Cause i = 0x8290 - Normal call clearing
*Jan 9 08:59:44.195: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref
= 0x8084
*Jan 9 08:59:44.207: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x0084
HQ-RTR(config-if)#
HQ-RTR(config-if)#do sh isdn status
Global ISDN Switchtype = primary-ni
ISDN Serial0/0/0:23 interface
dsl 0, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000007
Number of L2 Discards = 0, L2 Session ID = 1
Total Allocated ISDN CCBs = 0
HQ-RTR(config-if)#
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
