Hi,

Voice Mail During SRST Fallback
the* vm-integration* *pattern *commands send the appropriate DTMF digits
along with the CGN, CDN, and FDN strings to reach
the correct mailbox for extension and trunk calling combinations.

you need to configure below command :

vm-integration
pattern direct 2 CGN *
pattern ext-to-ext no-answer 5 FDN * CGN *
pattern ext-to-ext busy 7 FDN * CGN *
pattern trunk-to-ext no-answer 4 FDN * CGN *
pattern trunk-to-ext busy 6 FDN * CGN *

Cheers,
Aditya

On Tue, Feb 5, 2013 at 10:30 PM, <ccie_voice-requ...@onlinestudylist.com>wrote:

> Send CCIE_Voice mailing list submissions to
>         ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>         ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
>         ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>    1. Re: Messages button in SRST (Chrysostomos Christofi)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 5 Feb 2013 12:40:22 +0000
> From: Chrysostomos Christofi <ch.christ...@logicom.net>
> To: Pixar Perfect <pixarperf...@live.com>, CCIE Voice OSL
>         <ccie_voice@onlinestudylist.com>
> Subject: Re: [OSL | CCIE_Voice] Messages button in SRST
> Message-ID:
>         <f3a446ed84ff9449b29f801927620de783f8b...@exmbxsrv2.lgcom.net>
> Content-Type: text/plain; charset="iso-8859-7"
>
> Hi
>
> It looks fine the configuration that you described regarding of the
> requirements
>
> As the question  about the Proctor ,i  believe that no ones can answer that
>
>
> From: ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] On Behalf Of Pixar Perfect
> Sent: ?????, 5 ??????????? 2013 10:36 ??
> To: CCIE Voice OSL
> Subject: [OSL | CCIE_Voice] Messages button in SRST
>
> When Site B Phone 2 (DN 3002) hits the messages button in SRST, the SRST
> call control dials 912025552220 to the PSTN to ring the Voicemail ports at
> Site A. Unity plays generic Welcome greeting instead of the user greeting
> of user 3002.  The requirement is NOT to use Alternate Extension on the
> user. Another requirement on the Voicemail question is customize user 3002
> so user can hear the ANI and timestamp of the caller.
>
> IPExperts solution to the 1st requirement is to use calling number mask
> XXXX under hunt pilot. However this breaks the second requirement, as Unity
> Connection will only receive 4 digits ANI even for standard PSTN callers.
>
> Any comments of this use of XXXX could be graded and any experiences?
>
> I have a workaround that would cater to users at SiteB hitting messages
> button to check messages:
>
> 1)   Setup the voicemail DN in SRST to 912025552225
> 2)   User hits messages button and SRST/CME dials 912025552225 to Site A
> 3)   At the CUCM, setup a translation pattern to translate
> 2225/pt-gw-sa-only to 2220 and this same translation pattern masks the
> calling number XXXX. CSS (css-internal) on the translation pattern would be
> able to access the VM hunt pilot 2220
> 4)   Site B dialing 2225 for VM access would give the CUCM intelligence to
> differentiate a PSTN call to VM versus a call from Site B to VM via PSTN.
>  Due to the translation pattern configured the calling number presented to
> the CUC would be XXXX i.e., 3002
>
>
> CFNA and CFB at Site B SRST would still use 912025552220.
>
> Here is the call flow for CFNA and CFB in SRST
>
> 1)   PSTN phone calls Site B Phone 2 (SB-Ph2) while Site B is in SRST
> 2)   SB-Ph2 ring no-answer to voicemail DN which is setup as 912025552220
> 3)   Call hairpins back to PSTN to dial the VM pilot 2220 at Site A. ISDN
> setup carries RDNIS set to 3002
> 4)   CUCM receives RDNIS in the call, rings the hunt pilot 2220 and
> delivers it to Unity Connection to identify VM Box.
>
>
>
>
> I have tested these approaches  in the lab and each works like a charm,
> not sure if proctor deems this as a valid solution. Any thoughts?
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> </archives/ccie_voice/attachments/20130205/1f90d955/attachment-0001.html>
>
> ------------------------------
>
> _______________________________________________
> CCIE_Voice mailing list
> CCIE_Voice@onlinestudylist.com
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
>
>
> End of CCIE_Voice Digest, Vol 84, Issue 12
> ******************************************
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to