Ops sorry, I don't believe you can fix this any way but having the listen port be the default.
Sorry helps to actually read everything and not do too many things at once. Sent from my iPad On Feb 28, 2013, at 11:50 AM, Brad McAllister <b...@bdmcomputers.com> wrote: > Thanks guys, but I am not sure that applies in this scenario... the signaling > port was changed on the CME router. The phones I am using to call into BACD > with are also registered to the CME site. > > > On Thu, Feb 28, 2013 at 11:43 AM, Bill Lake <whl...@gmail.com> wrote: >> Right there Cory, the default is 1720 but if changed on router or CUCM then >> you have to match it. Since you already found it was changed in router, you >> can fix it alternatively here >> >> >> <image.png> >> >> On Thu, Feb 28, 2013 at 7:34 AM, Cory Gray <corygray22...@hotmail.com> wrote: >>> I believe for that to work you have to go to the H323 Gateway configuration >>> page in CUCM and match up the port there. Then reset your gateway in CUCM. >>> I THINK… never tried it >>> >>> >>> >>> From: ccie_voice-boun...@onlinestudylist.com >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Brad McAllister >>> Sent: Thursday, February 28, 2013 8:00 AM >>> To: ccie_voice@onlinestudylist.com >>> Subject: [OSL | CCIE_Voice] BACD w/ custom h225 port >>> >>> >>> >>> All, >>> >>> I recently completed the tasks for WB1 Lab 5a. Afterwards I decided to >>> configure BACD on BR2. After spending hours trying to figure out why I >>> received a fast busy immediately after dialing into my aa script, I found >>> the h225 setting from lab5 was the culprit! See below: >>> >>> voice service voip >>> h323 >>> h225 listen-port 1820 >>> >>> As soon as I remove the h225 listen-port 1820, BACD works fine. >>> >>> Is this expected behavior? Is there a way to make BACD work when the h225 >>> listen-port is modified? >>> >>> Thanks, >>> >>> - Brad >>> >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
