Experts! I configured CUE to work with UCM. I have configured a phone button of a phone with DN, say 6001, using CUE as its VM to transfer an active call to the voicemail. When there is a voicemail due to this action, I see/hear that the voicemail is from, let's say, 911.
So, 911 calls 6001, 6001 pick up the call, and transfers using the button.... Trasfer -> Xfer button -> Transfer. *911 leaves a message. When the message is played, it says message from 911.* Now, when in SRST mode, the same caller, 911, makes the same call and transferred using the same sequence, leaves a message. In this case, *the message is said to be from the 6001 DN itself.* Relevant configuration included. 6100 is my Voicemail pilot. voice translation-rule 6001 rule 1 /^\*/ // voice translation-profile Xfer-to-VM translate redirect-called 6001 dial-peer voice 6100 voip translation-profile out Xfer-to-VM destination-pattern 6100 session protocol sipv2 session target ipv4:<CUE Module IP> dtmf-relay sip-notify codec g711ulaw no vad ephone-dn 5 number *6001 call-forward all 6100 Connection is allowed between sip and h323 variances. SIP UA > Mwi server is configured for unsolicited notification. *The call is forwarded to VM but instead of telling the original calling party, it says call from 4001! * IS THIS AN EXPECTED BEHAVIOR! OR I am missing something? -- Suresh Bhandari
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
