Hi pIYUSH, Yes , I was using both Manual first to define the Switch type , Controller , Serial Interface then I was doing ccm-manager config server (subscriberip) then ccm-manager config OK , Don't you think in the service parameters when you go advanced and Make MGCP B-Channel Maintenanance status and you can busy out the channels by making 12 zeros and then 20 One's.
Anyway , What you are saying is definitely make sense although I did the above and I still find issues and I'd like to thank you so much for your great input. Best Regards, Hesham On 20 May 2013 04:10, Piyush Jain <[email protected]> wrote: > Hi Hesham, > > Are you using ccm-manager config and ccm-manager config server commands on > gateway ?? > > Whenever you have to configure Partial PRI (like 12 channels) then don't > use ccm-manager config commands. If you use, then everytime your router > reboots or you change anything in configuration then it will download the > configuration from call manager.. Call manager always create full PRI (i.e. > 31 channels). I believe thats the reason you are facing this issue.. > > > Thanks and Regards, > Piyush Jain > > > ------------------------------ > > > Message: 2 > Date: Sat, 18 May 2013 16:01:55 -0700 > From: Hesham Abdelkereem <[email protected]> > To: [email protected] > Subject: [OSL | CCIE_Voice] Cisco evils erase configurations needs > magician to explain how? > Message-ID: > <caa-uhvfss6yfv-tas-hcs1p3hszc_+eyogwpt9cgvcyh06h...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > > Dear Experts, > > I was practicing labs on my homelab yesterday. > I have noticed 2 things happened knowing that I always save my configs > every short bit of time. > 1- On my SC router I have configured the PRI Channels to use 12 channels > only. > I have hardcoded it with the manual configs as well as GUI Config and it > was working and when i was seeing show isdn service all the unused channels > were busied out and it was fine for all day. > 2-On my SC router , I have configured SRST and All dial-peer and everything > were working perfectly. > > I save all configs > > I have safely shutdown my lab and saved all configs before > second day > I have found > 1-SiteC MGCP became 31 Channels and not 12 > 2-All dial-peer are missing port 0/0/0:15 > > > can someone explain me the reason why that happened to me and how to avoid? > I am saving my configs always whenever i config any thing even if its > small???? > It's something severe and I was wondering why i scored 20% on my SRST as > well as low score on my VG sections. > so I believe it has something to do with that. > > > Thank you very much in advance > > Best Regards, > Hesham > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130518/b689de9e/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Sun, 19 May 2013 06:44:35 +0530 > From: sanity insanity <[email protected]> > To: "[email protected]" <[email protected]> > Subject: Re: [OSL | CCIE_Voice] BACD DOUBTS... > Message-ID: > <cag4zmyv+xmyonfj-8vni0u9fwd6wvk+7beqffa5d-4ufnnu...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > hi Guys, > Any update? > > > On Wed, May 15, 2013 at 11:15 AM, sanity insanity < > [email protected]> wrote: > > > Hi Guys, > > > > If there is a requirement using BACD that If agent did not answer the > > call in 10 s , the call should be routed to next > > agent. If agents are busy they should hear " All agents are currently > > busy..." > > The following prompts are available on the tftp serer ( ip address > > X.Y.X.X) and this needs to > > taken/downloaded to the flash of router. The prompts available are... > > > > 3) en_bacd_music-on-hold.au > > 4) en_bacd_options_menu.au > > 5) en_bacd_xferto_operater.au > > 6) en_bacd_afag.au > > 7) en_bacd_disconnect.au > > 8) en_bacd_enter_dest.au > > 9) en_bacd_invalidoption.au > > 10) en_bacd_welcome.au > > > > ================== > > Questions: > > ================== > > > > 1) Does this mean that we need to be using the BACD embedded scripts for > > bacd? > > > > 2) Also which one of the above prompts do we download ? The standard cco > > doc for the embedded script shows > > the following as the welcome prompt "welcome-prompt _bacd_welcome.au " . > > Are we requried to rename the prompt? > > > > > > -MJ > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130519/5c23e516/attachment-0001.html> > > ------------------------------ > > Message: 4 > Date: Sun, 19 May 2013 07:19:17 +0530 > From: "singh" <[email protected]> > To: > [email protected];[email protected] > Subject: [OSL | CCIE_Voice] Unity connections - Unassigned Numbers > question > Message-ID: <[email protected]> > Content-Type: text/plain; charset="utf-8" > > Hi Guys,For a block of unassigned numbers . I am able to play a prompt > of"The number which you are trying reach is not a valid number. Pleasestay > online for company directory .Spell the first and last name"This I am doing > by forwarding this range to of unassigned numbersto Voicemail and having > unity connection to play a personal recorded greeting andthen forwarding it > to directory handler(i)If the caller press 0 , transfer of the call to HQ > phone 2.This I am able to achieve with directory handler setting "If Caller > Presses Zero"go to user with Mailbox hqphone 2(ii) If the caller press * , > call should drop.This I am able to achieve with directory handler setting > "Allow Caller to Exit Using * Key"Questions :=================1) How do I > allow the caller to press 1 to allow directory search withFirst Name / Last > Name ( Directory). How to achieve this?2)If the caller does not dial > anything it should say sorry we didn'trecieve any response from you " > Please try again later...goodby > e".How to achieve this?3) Also are the methods used by me on( i) and( > ii)right ?Please help Guys!Regards,SinghGet Yourself a cool, short > @in.comEmail ID now! > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130519/ec9bc526/attachment-0001.html> > > ------------------------------ > > Message: 5 > Date: Sun, 19 May 2013 07:38:06 +0530 > From: Anirudh Mavilakandy <[email protected]> > To: sanity insanity <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [OSL | CCIE_Voice] BACD DOUBTS... > Message-ID: > <CA+3m8Ym_9djxOKPdB6fvNhav2n-PKgOiEiGcf3oOpQAW=4m...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > You can copy the script available on CCO and modify it according to the > requirement. > > The prompts that you would need to download are: > en_bacd_music-on-hold.au > en_bacd_welcome.au > > _bacd_welcome.au - You don't have to rename the prompt. This can be > configured under welcome-prompt or drop-through-prompt as per requirement. > In your example, you can use drop-through-prompt and drop-through-option to > send the call to param aa-hunt1. > > en_bacd_music-on-hold.au - moh should be configured under telephony > service. Else the call will drop after " All agents are currently busy..." > > -- > Anirudh M Mavilakandy > > > On Sun, May 19, 2013 at 6:44 AM, sanity insanity < > [email protected]> wrote: > > > hi Guys, > > Any update? > > > > > > > > On Wed, May 15, 2013 at 11:15 AM, sanity insanity < > > [email protected]> wrote: > > > >> Hi Guys, > >> > >> If there is a requirement using BACD that If agent did not answer the > >> call in 10 s , the call should be routed to next > >> agent. If agents are busy they should hear " All agents are currently > >> busy..." > >> The following prompts are available on the tftp serer ( ip address > >> X.Y.X.X) and this needs to > >> taken/downloaded to the flash of router. The prompts available are... > >> > >> 3) en_bacd_music-on-hold.au > >> 4) en_bacd_options_menu.au > >> 5) en_bacd_xferto_operater.au > >> 6) en_bacd_afag.au > >> 7) en_bacd_disconnect.au > >> 8) en_bacd_enter_dest.au > >> 9) en_bacd_invalidoption.au > >> 10) en_bacd_welcome.au > >> > >> ================== > >> Questions: > >> ================== > >> > >> 1) Does this mean that we need to be using the BACD embedded scripts > for > >> bacd? > >> > >> 2) Also which one of the above prompts do we download ? The standard cco > >> doc for the embedded script shows > >> the following as the welcome prompt "welcome-prompt _bacd_welcome.au " > . > >> Are we requried to rename the prompt? > >> > >> > >> -MJ > >> > > > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20130519/7d1e7595/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > [email protected] > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 87, Issue 42 > ****************************************** > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
