This is what I follow For ccie lab, i keep all the phones in none partition so
that everything has access to the phones.
Also I keep uccx/cue route point and CTI port in none partition and assign none
CSS to cue/ uccx route point and CTI port.
This works for me very well.
Thanks and regards,
Piyush Jain
Sent from my android device.
-----Original Message-----
From: ccie_voice-requ...@onlinestudylist.com
To: ccie_voice@onlinestudylist.com
Sent: Tue, 21 May 2013 9:37 PM
Subject: CCIE_Voice Digest, Vol 87, Issue 65
Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com
You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."
Today's Topics:
1. CUE/UCCX Integration (Nicolas MICHEL)
----------------------------------------------------------------------
Message: 1
Date: Tue, 21 May 2013 14:23:31 +0200
From: Nicolas MICHEL <mcl.nico...@gmail.com>
To: OSL Voice <ccie_voice@onlinestudylist.com>, Nicolas MICHEL
<mcl.nico...@gmail.com>
Subject: [OSL | CCIE_Voice] CUE/UCCX Integration
Message-ID: <519b6743.2010...@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hey Guys.
I had some trouble this weekend with my CUE integration with CUCM and I
would like to know how to do it correctly while doing it fast ... (no
best practices here I know :) )
This is how I see things.
-Create CTI RP in the none partition (accessible to anyone) with a CSS
that can see CTI ports (let's say CSS_CTI_RP that includes PT_CTI_PORTS)
- Create 2 CTI Ports that are in the PT_CTI_PORTS with a CSS that can
see directly phones (CSS_INTERNAL that include PT_INTERNAL)
-Create a user that has CTI standard enabled and controlled devices :
CTI-RP and CTI_Ports
-Create a voicemail pilot that is equal to the CTI RP in the none partition
-Create a Voicemail profile that include the newly created voicemail
pilot for BR2
-Apply Voicemail profile to the phones *reset them*
Then on the CUE.
-Check the license and upload new license if not OK
-Go Offline and restore factory default
- Wizard install: Configure CUCM IP/CTI user/ etc etc and imports users .
Check if the CTI ports are registered on the CUCM
Check if the CTI RP is registered on the CUCM
Check by pressing the voicemail button on the phone...
My main concern is about the CSS/PT configuration ...
Can someone please enlighten me ? That would be awesome !
Thanks
Nic
------------------------------
_______________________________________________
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 87, Issue 65
******************************************
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
