Glad that i was able to help ok for your info. In the future when u make any minor changes into mgcp gateways always restart and no mgcp and mgcp even if it a tickbox on the gateway but in h323 or sip trunk u can just restart the h323 gateway or sip trunk are good enough
On Tuesday, September 3, 2013, aman sinha wrote: > Hi Hesham, > > I had tried resetting the Gateway multiple times. > > Tried no mgcp and mgcp ; and ir worked. > > Thanks !! > > > On Tue, Sep 3, 2013 at 1:00 PM, Hesham Abdelkereem < > [email protected] <javascript:_e({}, 'cvml', > '[email protected]');>> wrote: > >> Hi Aman, >> >> After applying that prefix make sure you restart the gateway on the >> gateway page then Telnet/SSH to the MGCP Gateway/Router itself then conf t >> and then NO MGCP then MGCP >> >> See if that will work >> >> Thanks, >> Hesham >> >> >> On 2 September 2013 23:58, aman sinha <[email protected]<javascript:_e({}, >> 'cvml', '[email protected]');> >> > wrote: >> >>> Hi All. >>> >>> Prefixing +44 in calling number is not working on MGCP gateways. >>> Any suggestions ? >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
