Hi folks,
For T1 CAS, channels can be grouped as per following configuration; ds0-group 1 timeslots 1-15 type signaltype (reserved for incoming calls) ds0-group 2 timeslots 16-24 type signaltype (reserved for outgoing calls) With the help of above two commands, two interfaces get creates viz port 1/0/0:1 and port 1/0/0:2. Now using these two interfaces viz 1/0/0:1 and 1/0/0:2, I can configure appropriate dial-peers to reserve interfaces for incoming call and outgoing calls. Now if we see the same thing in T1 CCS, how can following command can be used to achieve the above requirement? pri-group timeslots 1-15 pri-group timeslots 16-23 Now to configure appropriate dial peers to route calls, which two ports should be defined under dial peer command (the way port 1/0/0:1 and 1/0/0:2 are used in T1 CAS configuration)? Best Regards, Vivek Batra
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
