Hi All
when I make pstn call, my phone extension caller id is not displayed in
receiver phone.
it is displayed something reception number like that.
below are the debugs which I am sending to pstn.
will number type or plan type setting required to achieve..
Apr 11 11:43:48: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0277
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0081, '956347130'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '01707956215'
Plan:Unknown, Type:Unknown
Apr 11 11:43:49: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8 callref =
0x8277
Channel ID i = 0xA98381
Exclusive, Channel 1
Thanks in advance for any comment
Regards,
Dharambir Kumar
_______________________________________________
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
