Hi there I have some questions about 3.10:
1. Allow wired users to connect through AAP2 to the same VLAN as users on SSID Test2 As I understand, the wired clients should get an IP from 10.10.12.0 /24. But with the following configuration on AAP2, they get an IP from 10.10.210.0 /24: interface FastEthernet0.110 encapsulation dot1Q 110 native no ip route-cache bridge-group 1 ! If they should be in VLAN 12, the Fa 0.12 should be the native VLAN, shouldn’t it? Or would it be a prerequisite, that I have configured a trunk on the access switch, connected to AAP2 Fa 0? 2. The AAP2 must also allow users to connect to SSID Test1, with the traffic passing back to through AAP1: Also here, the wireless clients connecting to SSID Test1 on AAP2 should get an IP from 10.10.11.0 /24? But then I would also need the following on AAP1, not only on AAP2. Otherwise the VLAN 11 is not provided over the bridge link: interface Dot11Radio0.11 encapsulation dot1Q 11 no ip route-cache bridge-group 11 ! Maybe I am wrong, but this is why I ask you guys ;-) Thanks a lot in advance and best regards Dominic
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
