I would be interesting to post your configurations for this. I remember having this at Bootcamp and made it work. There is one special think I remember. The AP-to-AP communication SSID+VLAN is always native. Others are tagged. The thing is that the communication goes over the native vlan but the Repeater and Root somehow bridge them over and put them on correct VLAN after the traffic is passed between the two. I don´t have IPX workbook, but I had a similar case in Fastlanes workbook. The user had a seperate SSID and repeater had another to communicate to Root on the native vlan.
regards. Kristjan ------------------------------ Message: 5 Date: Sun, 30 Jan 2011 14:59:24 +0100 From: Ralph Olsen <[email protected]> To: [email protected] Subject: Re: [CCIE Wireless] IPX-WB1 LAB 3.8 - Repeater Message-ID: <[email protected]> Content-Type: text/plain; charset=ISO-8859-1 Conclusion after looking deeper into this. You need luck to make it work. :o) I have tried a lot of different combos and boilded it down to a SSID with auth open. When the PC connect directly to the root AP it works fine and gets an IP from a different VLAN that bridge-group one (vlan 12 in the WB), but when it connects to the Repeater AP it doesn't work. When the PC is on the repeater AP the traffic is unidirectional only working from the PC -> repeater -> rootap -> Def.gw. Traffic in the other direction gets cut off at the rootap. Can someone else try to make 3.8 work? /Ralph 2011/1/28 Ralph Olsen <[email protected]>: > Hi Group, > > I just been looking into lab 3.8 in the IPX-WB1. Radio Roles - Repeater. > > Most of the things I have done works perfectly, the repeater AP > associates with the root AP and I can see that it is using LEAP WPA as > I wanted. ?Associated To AP AP1 001a.302e.4850 [LEAP WPA]. > > But the part I can't get to work is: "Ensure that users would be able > to get a DHCP address in the 10.10.12.0/24 subnet. Do not configure > DHCP for this." > > In the DSG VLAN 12 on the AP1-d0 interface have been made native and > in my mind that would map it to the d0 interface on AP2. When I > connect with a client to AP1, I get the 10.10.12.0/24 DHCP offer right > away. When I connect to the AP2 I never get an offer (or see request > at the dhcp server). > > The ADU client associates fine with both AP1 and AP2: Interface > Dot11Radio0, Station WL02-LAPTOP 0040.96b1.8207 Associated > KEY_MGMT[WPA] > > Did Jason just become lucky in the DSG or is something missing? > > /Ralph > ------------------------------ _______________________________________________ CCIE_Wireless mailing list [email protected] http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless End of CCIE_Wireless Digest, Vol 22, Issue 41 ********************************************* _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
