That came in 12.4(3G)JA, according to the release notes: http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6521/prod_bulle tin0900aecd806351d9.html. Given that the software blueprint lists 12.3(8)JE(x), I would not expect to see Universal mode on the current lab.
Jason Boyers - CCIE #26024 (Wireless) Technical Instructor - IPexpert [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kristján Ólafur Eðvarðsson Sent: Saturday, February 19, 2011 3:19 PM To: [email protected] Subject: [CCIE Wireless] 1. question about "universal" mode (Iwan Hoogendoorn) Hi, I had the same problem. I used to configure universal mode just fine, but I realized that later I was accidentally working on 12.4 code. It deffinately depents on software version for the 1242s. I am using software version: c1240-k9w7-mx.123-8.JEA3 how and it doesn´t work any more to make the command: (config-if)station-role workgrou-bridge universal <mac> I googled and found this document: http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configurati on/guide/s43rf.html#wp1179361 it is a configuration guide for 12.4(3g)JA & 12.3(8)JEB and it mentiones this command. So according to this. I am suspecting that the universal command for the bridge comes in 12.3.(8)JEB but I am using 12.3(8)JEA3 a slightly older version. Is this the case for you to Iwan ? I tried to download 12.3(8)JEB but it was listed as defered on the Cisco dowload page and therefore not downloadable. Does anyone have it somewhere, just for lab testing ? regads. Kristjan 1. question about "universal" mode (Iwan Hoogendoorn) ---------------------------------------------------------------------- Message: 1 Date: Fri, 18 Feb 2011 11:51:15 +0000 From: Iwan Hoogendoorn <[email protected]> To: "[email protected]" <[email protected]> Subject: [CCIE Wireless] question about "universal" mode Message-ID: <c9841bc3.e98f%[email protected]> Content-Type: text/plain; charset="windows-1252" Group, I am trying to configure my WorkgroupBridge in "universal mode" and all I am getting is the "multicast mode" option. Can someone please explain why this is? I think it has something to do with IOS versions ? But can not figure out starting from what IOS version this command will be available? I currently run version "c1240-k9w7-mx.123-8.JEA3/c1240-k9w" And this is my config output: ========================================================== WGB#conf t Enter configuration commands, one per line. End with CNTL/Z. WGB(config)#int dot110 WGB(config-if)#station-role workgroup-bridge ? multicast configure multicast <cr> WGB(config-if)#station-role workgroup-bridge multicast ? mode configure multicast mode WGB(config-if)#station-role workgroup-bridge multicast mo WGB(config-if)#station-role workgroup-bridge multicast mode ? client Client-mode accepts only 3-MAC address header mulitcast packets infrastructure Infrastructure-mode accepts only 4-MAC address header multicast packets ========================================================== Can someone help me out here? Thanks, Iwan Hoogendoorn _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
