Thanks Jason, Been looking like crazy but here it is for the reccord:
(2106-A) >config advanced 802.11b channel dca interval 4 (2106-A) >config advanced 802.11b channel dca anchor-time 9 This makes it run every 4 hours instead of the 600 sec default. and first run is at 9 AM. So next cycle is 13 PM e.t.c regards. Kristjan -----Original Message----- From: Jason Boyers [mailto:[email protected]] Sent: 27. febrúar 2011 13:59 To: Kristján Ólafur Eðvarðsson Cc: [email protected] Subject: Re: [CCIE Wireless] RRM in 4.2 Look for a CLI command. You're correct that it can't be changed via the GUI. Jason Boyers - CCIE #26024 (Wireless) Technical Instructor - IPexpert [email protected] On Feb 27, 2011, at 12:04 AM, Kristján Ólafur Eðvarðsson <[email protected]> wrote: > Hello group, > > I was watching some youtube videos about RRM. > I saw one with Jerome that showed changing the AutoRF > Channel Assignment Method to hours with anchor times of choice instead of the > default 600 sec. > It is actually grayed out and you cannot change interval or anchor time in my > WLC's 4.2 versions. > > I thought it was not availablein 4.2 code ?? I even downgraded my 2106 to > 4.2.130 from .210 to see if there were differences. > But nope. The 4402 that I accessed didn´t have this option either.. It was > 4.2.210 though... > > I have seen this in recent codes and used it. > > regards. Kristjan > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
