I should have added the config: cat2:
router eigrp 1 redistribut-static distribute-list 1 out int fast 0/22 ! access-list 1 deny 0.0.0.0 access-list 1 permit any On 30 March 2011 17:35, Leigh Jewell <[email protected]> wrote: > The other things is the answers point to 'redistributing static' to get the > Home subnet 192.168.10.0/24 advertised in EIGRP. The trouble is from > question *2.4 Static Routing* a default route was configured which would > be redistributed to Medium Office. This conflicts with the requirements in > question *2.6 EIGRP Routing* "Medium Office Clients should not be able to > connect to the Internet". A distribution filter really needs to be added to > ensure default gets filtered out. > > Is the question wrong or am I misunderstanding the answer ? > > Cheers, > Leigh. > > On 30 March 2011 17:27, Leigh Jewell <[email protected]> wrote: > >> *Workbook 1 Lab2: 2.6 EIGRP Routing* >> >> The question calls for configuring EIGRP with as few commands as possible. >> The answer uses a combination of 'passive-interface default' and 'network >> statements' to get the networks to advertise to the neighbour (around 40 >> commands). I am thinking a better answer with fewer commands (15) is: >> >> cat1: >> router eigrp 100 >> no auto-summary >> network 10.10.10.0 0.0.0.255 >> redistribute connected >> >> cat2: >> router eigrp 100 >> no auto-summary >> network 10.10.10.0 0.0.0.255 >> network 172.16.99.0 0.0.0.3 >> redistribute connected >> >> cat4: >> router eigrp 100 >> no auto-summary >> redistribute connected >> no auto-summary >> network 10.10.10.0 0.0.0.255 >> network 172.16.99.0 0.0.0.3 >> >> Thoughts ? Comments ? >> >> There is also a typo in the answer 'Because the CME router ip address' >> when it is referring to the Home office subnet 192.168.10.0/24. >> Additionally the addition of the static router is in against the question >> *2.4 Static Routing* which states 'No other static routes are allowed on >> any device'. >> >> >> >> Cheers, >> Leigh. >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
