Just like in the real lab, this involves looking ahead. Subsection 4.5 lists the VLANs and controllers. Of course, the requirement may not be laid out as clearly as here. It may list the SSIDs and VLANs, like in 4.2, but then list the SSIDs and WLCs in another table, like 4.5 but without the VLAN column. It would be your job to decipher the requirements based on those, and any other requirements within the lab that affect that. In this workbook, each lab is self-contained, so anything within that lab is fair game. On the real lab, the entire 6 section lab is fair game for interactions and information.
Jason Boyers - CCIE #26024 (Wireless) Technical Instructor - IPexpert, Inc. Mailto: *[email protected] * On Fri, May 27, 2011 at 12:25 AM, Steve Steve <[email protected]> wrote: > Hi guys, > > I had been confused about points 5 and 6 in lab 4.2, where we need to > create different VLAN interfaces on different WLCs. The question had asked > that each WLC should only has the required interfaces configured. However, I > do not have any clue as in how to determine if a WLC should have which VLANs > configured or not. For example, the "guest" interface is created in all WLCs > except WLC5, "handhelds" is only in WLC1 and WLC5. How do I know what > interfaces are to be created for each WLC? > > Thanks in advance for the help. > > Best regards, > Steve > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
