Hey Kristjan, thanks for your response. Yes, I have a basic config on both root and WGB AAPs, e.g. auth open, ssid and that's it :) Assigning static address to wired WGB-client didn't help as well, so it's not DHCP-related issue. I had sub-interfaces configured on the Root AAP, e.g. d0.11, but I believe they needed, otherwise what's the point of having 'work clie 11' on the WGB. Could you please share a working config, I will test if it works with wired WGB-clients and you will practice speed ;o)
Thank you. Regards, Vitaly 2011/6/6 Kristján Ólafur Eðvarðsson <[email protected]> > Hey Vitaly, > > I tested this out in a lab recently. I reccon that the only command > need for the workgroup-bridge vlan x is needed. This will hide all > other stuff you would normaly do. for example int dot0.11 blablabla. > But with other stuff on the wire I didn´t test it but if the WGB was > working > from wired, I suppose clients on the WGB VLAN should work too. > > I find sometimes in cases with dhcp or other broadcast/multicast issues > the infrastructure-client command on the Root AP helps. After all > it is meant to deliver multicast (and broadcast ?) packets reliably.. > > Putting a static IP of course might help to isolate the problem to > start with and also to simplify security before troubleshooting the > DHCP related issues. I like to add the security stuff as the last step > to see all radio related stuff working first. > > my 5 cents.. > > regards. Kristjan > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 5 Jun 2011 19:57:04 +0100 > From: Vit <[email protected]> > To: [email protected] > Subject: Re: [OSL | CCIE_Wireless] [CCIE Wireless] Autonomous Mode > Configs > Message-ID: <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > Guys, > > I've got a question regarding the 'workgroup-brdige client-vlan X' command > and Jason's post -> > http://onlinestudylist.com/archives/ccie_wireless/2011-March/002018.html > > Has anyone managed to get WGB with client-vlan working, e.g. wired clients > connected to the WGB are able to get ip address from a DHCP server and ping > the rest of the world through the wireless link between Root and WGB? When > I > create d0.11 subinterface on the WGB, then everything works, once I delete > d0.11 (and reboot the WGB to remove Virtual-Dot11Radio0.11) and apply 'work > clie 11' then wired clients register on the Root AAP but do not get ip > addresses... Yes, I also applied 'bridge 11 proto ieee' to WGB, but no > joy... > > Any help will be much appreciated. > > Regards, > Vitaly > > ----------------------------------------------------------------------------- > -- Regards, Vit
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
