Hi guys. Is the list a little bit inactive lately, but I have to speed up my studies because in one week I´m on Brussels :)
According the exercises of lab9, Here are my comments: - 9.1: Cat6500 QoS; Ok access list sound fine!!! but I think if we trust ef and CS3 traffic instead of set it, the result should be the same and I like more the second one, because if the switch receives the traffic with DSCP EF I don´t see the need to remark with the same DSCP, only trusting it should be sufficient. Thoughs??? -9.2: Rogues seen every 5 minutes. The DSG uses and SNMP value in "tracking parameters" but since 4.2 this method does not seem to be valid: http://www.cisco.com/en/US/docs/wireless/location/2700/3.1/configuration/guide/lacg_ch4.html#wp1049741 , This document explains that this parameters only works on 4.1 and earlier code and I not sure this is working with code 4.2; To match this requirement I would set the "location information as old as" list on the maps to 5 minutes and activate in tracking parameters the tracking of rogues APs. -9.3: Is a best practice (if not mandatory) to maintain all the WLC, WCS and location appliance synced with an NTP server. Maybe for this exercise is better to add the configuration of the NTP server for all the devices affected by this task. I will grateful any comments about this lab or others previous those who have not received opinion. My second attemp is too close and we would like to share and clarify any of the issues presented. Thanks Guys!!!
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
