Hi team,
I've found out that I can not type a fraction number as an antenna gain:
AAP1(config-if)#antenna gain 9.5
^
% Invalid input detected at '^' marker.
Documentation says we can use a decimal for it:
Command Purpose
Step 1 configure terminal Enter
global configuration mode.
Step 2 interface dot11radio { 0 | 1 } Enter
interface configuration mode for the radio interface. The
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.
Step 3 gain dB
Specifies the resultant gain of the antenna attached to the
device. Enter a value from -128 to 128 dB. If necessary, you
can use a decimal in the value, such as 1.5.
Note This setting does not affect the behavior of the wireless
device; it only informs the WLSE on your network of
the device's antenna gain.
So just in case we would be asked during the real exam to configure such a
number (like 10.5 or 5.5) what is the right answer?
P.S. I'm using 12.3(8)JA2
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
