Hi Dominic, from the documentation:
"The percentage of the channel used by roaming calls up to the value specified in this field is deducted from the value you specified in the Max Channel Capacity (%) field. For example, suppose you have entered 75% in the Max Channel Capacity (%) field and 6% in the Roam Channel Capacity (%). If roaming calls are using 5% of the channel, a maximum of 70% of the channel can be used for voice." I hope this answers your question. /Ralph 2011/8/6 Stalder Dominic <[email protected]> > Hi group > > I have a question about 3.14 of lab workbook 1. This sentence is not clear > for me: “Traffic will only be allowed if the channel utilization is under > 60% but a phone that moves within range can use *another *5%” > > I know that on WLC’s, the roaming bandwith is included in the Max RF > Bandwidth (%), so on the Controller I would configure it this way because of > the *another *keyword: > > Max RF Bandwidth (%): 65% > Reserved Roaming Bandwidth (%): 5% > > Are the AAP’s the same way, so the roaming bandwith is included or is it > splitted? If it is splitted, then the solution seems OK for me, but if they > are like on WLC, then in my opinion it should also be like this: > > > > The DSG says this: > > > > Thanks a lot and best regards > Dominic > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > >
<<image.png>>
<<image.png>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
