Hello,
Can anybody help with this. I am trying to add some 1140 AP's to a controller
running 7.0.116.0. But the AP joins, downloads the software but then reboots. I
have attached the log from the AP.
Regards
Phil
using eeprom values
WRDTR,CLKTR: 0x87000800 0x40000000
RQDC ,RFDC : 0x80000035 0x0000020a
using ÿÿÿÿ ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
......................................................................................................................................................................................................................................................
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x87000800, 0x40000000
RQDC, RFDC : 0x80000035, 0x0000020a
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 28 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 7420416
flashfs[0]: Bytes available: 24964608
flashfs[0]: flashfs fsck took 20 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: f0:f7:55:19:34:2d
Ethernet speed is 100 Mb - FULL duplex
Loading
"flash:/c1140-k9w8-mx.124-23c.JA2/c1140-k9w8-mx.124-23c.JA2"...################################################################################################################################################################################################################################################################################################################################################################################################################################################################
File "flash:/c1140-k9w8-mx.124-23c.JA2/c1140-k9w8-mx.124-23c.JA2" uncompressed
and installed, entry point: 0x4000
executing...
enet halted
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA2,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:50 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
......................................................................................................................................................................................................................................................
flashfs[1]: 28 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32126976
flashfs[1]: Bytes used: 7420416
flashfs[1]: Bytes available: 24706560
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Ethernet speed is 100 Mb - FULL duplex
Radio0 present 8363 8000 90020000 0 90030000 B
Radio1 present 8363 8000 98020000 0 98030000 0
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1142N-E-K9 (PowerPC405ex) processor (revision B0) with
98294K/32768K bytes of memory.
Processor board ID FCZ1602W3Z1
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 7.0.116.0
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F0:F7:55:19:34:2D
Part Number : 73-12836-04
PCA Assembly Number : 800-33767-04
PCA Revision Number : A0
PCB Serial Number : FOC1552367Q
Top Assembly Part Number : 800-33775-03
Top Assembly Serial Number : FCZ1602W3Z1
Top Revision Number : A0
Product/Model Number : AIR-LAP1142N-E-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:07.759: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self
test passed
*Mar 1 00:00:07.769: *** CRASH_LOG = YES
Security Core found.
Base Ethernet MAC address: F0:F7:55:19:34:2D
*Mar 1 00:00:09.336: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
self test passed on interface Dot11Radio 0
*Mar 1 00:00:09.907: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.952: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event
log (contains, 826 messages)
*Mar 1 00:00:09.975: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.019: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar 1 00:00:12.100: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0, changed state to up
*Mar 1 00:12:02.007: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA2,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:50 by prod_rel_team
*Mar 1 00:12:02.007: %SNMP-5-COLDSTART: SNMP agent on host APf0f7.5519.342d is
undergoing a cold start
*Mar 1 00:12:02.059: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:12:02.122: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to
reset
*Mar 1 00:12:02.122: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to
reset
*Mar 1 00:12:03.122: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio1, changed state to down
*Mar 1 00:12:03.122: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio0, changed state to down
*Mar 1 00:12:03.315: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:12:10.247: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0
assigned DHCP address 10.1.3.90, mask 255.255.0.0, hostname APf0f7.5519.342d
*Mar 1 00:12:20.929: status of voice_diag_test from WLC is false
*Mar 1 00:12:20.986: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:12:23.388: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power
source
*Mar 1 00:12:23.411: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:12:23.436: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:12:24.396: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio1, changed state to up
*Mar 1 00:12:24.396: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host
255.255.255.255 started - CLI initiated
*Mar 1 00:12:24.422: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio0, changed state to up
Translating "CISCO-CAPWAP-CONTROLLER.slimming-world.com"...domain server
(10.1.100.150) [OK]
examining image...
extracting info (292 bytes)
Image info:
Version Suffix: k9w8-.124-23c.JA2
Image Name: c1140-k9w8-mx.124-23c.JA2
Version Directory: c1140-k9w8-mx.124-23c.JA2
Ios Image Size: 4895232
Total Image Size: 5089792
Image Feature: WIRELESS LAN|LWAPP
Image Family: C1140
Wireless Switch Management Version: 7.0.116.0
Extracting files...
c1140-k9w8-mx.124-23c.JA2/ (directory) 0 (bytes)
extracting c1140-k9w8-mx.124-23c.JA2/8001.img (172792 bytes)
*May 30 14:21:41.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent
peer_ip: 10.1.4.200 peer_port: 5246
*May 30 14:21:41.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 30 14:21:41.846: %CAPWAP-5-DTLSREQSUCC: DTLS connection created
sucessfully peer_ip: 10.1.4.200 peer_port: 5246
*May 30 14:21:41.847: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.4.200
*May 30 14:21:41.847: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform
archive download capwap:/c1140 tar file
extracting c1140-k9w8-mx.124-23c.JA2/c1140-k9w8-mx.124-23c.JA2 (4717779 bytes)
*May 30 14:21:41.863: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP.
Downloading image from Controller.
*May 30 14:21:41.869: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
