You will get all certificates handed to you, you do not have to issue for them yourself. Although I highly recommend you do know how to do that for real life scenarios, but not required for the lab itself.
You should know how to install a certificate in the ACS, it is not very difficult to do so. I'd also recommend knowing how to setup static NAT in a router. More NAT skills than that not really required. On the wired side I'd recommend focusing on QoS and Multicast topics. Sr. Network & Wireless Consultant, 2xCCIE #28735 (R&S / Wireless) From: [email protected] [mailto:[email protected]] On Behalf Of Jay Killion (jakillio) Sent: den 7 januari 2014 22:06 To: [email protected] Subject: [OSL | CCIE_Wireless] Preconfigured in lab? Hi all - Two questions on things that will be preconfigured in the lab. 1 - For PEAP and TLS, will the certificate likely already be installed on ACS? Not sure what level I need to learn certificates, such as setting up a CA on W2K3, generating a signing request, etc etc. 2 - Will NAT likely be pre-configured? I'm working on WB1 Lab 4.3 and the requirement is to have an AP join a NAT'd address on the controller. However, the initial configs don't have anything related to NAT so I'm assuming the requirement is for me to create new L3 interfaces with nat inside / outside. Trying to think back to my R/S lab studies, I don't recall ever creating L3 interfaces without explicitly being told to. Just want to make sure I have my expectations in line. Thanks - Jay Killion, CCIE #17873 R/S
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
