Hey Christos - Did this start working for you? When you initially configure RF Group members it always shows "invalid IP", but give it a minute or so and it resolves itself. I would go back and check the controller again to see if it's working as expected. If it still isn't, I would ensure you are using the Management IP.
Jay Killion, CCIE #17873 > >Message: 1 >Date: Sat, 1 Feb 2014 22:09:57 +0000 >From: Xristos Stefaneskou <[email protected]> >To: "[email protected]" > <[email protected]> >Subject: [OSL | CCIE_Wireless] WB1-Lab4.7 RRM >Message-ID: <65AD90923BD6434BAB04D8558CD72F07083361E2@aiolos> >Content-Type: text/plain; charset="us-ascii" > >Hi, >I'm trying to setup the RRM for lab 4.7. >WLC1 is the leader and WLC2-WLC4 should be members of RF group "RRM1". >Even though i have configured WLC1 as leader and all WLCs have the same >RF group name, i receive an error on WLC1 (Cntlr-name & IP mismatch) for >the WLC2-WLC4.Names and IPs are correct. >Any thoughts? >Thanks, >Christos. > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: ></archives/ccie_wireless/attachments/20140201/3f75defb/attachment-0001.htm >l> > >------------------------------ > >_______________________________________________ >Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > >iPexpert on YouTube: www.youtube.com/ipexpertinc > >End of CCIE_Wireless Digest, Vol 58, Issue 2 >******************************************** _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
