We have 43 projects with 3 different environments (making it a total of 129 CC selectable builds). Two thirds of the builds are CIB, one thirds checks for modifications every 30 minutes and the other every hour. The other builds are manually kicked off.
Helmut Arnold Configuration/Release Management Edfinancial Services 120 North Seven Oaks Drive Knoxville, TN 37922 865 342-5275 [EMAIL PROTECTED] From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Ruben Willems Sent: Wednesday, October 22, 2008 9:59 AM To: [email protected] Subject: [ccnet-user] Re: Poor Performance since installing CC 1.4 Hi just for curiosity, how many projects do you have in your setup? I've got 17, from which 9 are continuously checking source control (about every minute). We're with 10 people who use CCTray, with the default interval seconds. and for the moment everything runs fine. with kind regards Ruben Willems On Wed, Oct 22, 2008 at 3:31 PM, Helmut Arnold <[EMAIL PROTECTED]> wrote: Hi Ruben, Yes I have seen that in CC Tray. I thought there might be a way to decrease the polling frequency in the service. I noticed that when I looked at the ccnet.log file (before I modified the logging level) that it was writing to the log several times a second. Thank you, Helmut Arnold Configuration/Release Management Edfinancial Services 120 North Seven Oaks Drive Knoxville, TN 37922 865 342-5275 [EMAIL PROTECTED] From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Ruben Willems Sent: Wednesday, October 22, 2008 9:27 AM To: [email protected] Subject: [ccnet-user] Re: Poor Performance since installing CC 1.4 Hi to adjust the polling interval of cctray, go to the file menu : In the general tab default it is set to 5 seconds. You can easily indcrease it. Decreasing to something below 5 seconds is not possible. with kind regards Ruben Willems On Wed, Oct 22, 2008 at 2:20 PM, Helmut <[EMAIL PROTECTED]> wrote: The number of projects have increased since I ugraded to 1.4. That is why I have completely removed some projects and turned off the cib execution of others. cctray is running on the build machine. no other changes, we have upgraded accurev but that has actually helped the performance on other machines automatic builds turned off - I had it set to check for modifications every 30 minutes to 1 hour depending on the build environment. This is not the case for all of our builds just some. This was accomplished by modifying the trigger sections. Polling can be modified??? That might help because I have checked the ccnet.log and it was writting several times a minute until I changed the logging level to error. On Oct 22, 4:09 am, "Ruben Willems" <[EMAIL PROTECTED]> wrote: > Hi > > a few questions : > ° is the amount of projects the same as when you had 1.3 > ° what connection do you use between cctray and the server? > http or remoting > ° are there other changes (source control, ...) done that you know > > What do you mean with > I have turned off most of the automated build checks because of > performance. > > did you change the polling in cctray, or did you alter the trigger section > in the ccnet.config? > > with kind regards > Ruben Willems > > > > On Tue, Oct 21, 2008 at 8:33 PM, Helmut <[EMAIL PROTECTED]> wrote: > > > We are running CC 1.4 .Net and CC Tray. Since upgrading from 1.3 to > > 1.4 our server performance has taken a substantial hit. I am running > > process explorer on the server and I notice that ccservice.exe is > > running between 8 to 30 % cpu utilization. I have turned off most of > > the automated build checks because of performance. Any ideas or > > thoguhts on what might be the cause? > > > Thanks in advance for any help.- Hide quoted text - > > - Show quoted text -
