Well the after effects are a pretty common example of what happens when CruiseControl loses track of a process. Usually when I see this is when CC.NET spawns a process then that process spawns a different process and that process dies. Usually in that case what you have to do is figure out by looking at the processes owned by the User that is running CC.NET and figure out which one is the zombie and kill it. At that point if you guessed right it will fail the build it was in the middle of and continue on normally. Now, which process you killed should give you a good idea of what went wrong. My only thought other than that would be to look at the code changes prior to when it started failing and see how MSBuild might react to those changes. Maybe someone added something that doesn't work on the server.
On Nov 25, 5:28 pm, adickinson <[EMAIL PROTECTED]> wrote: > I have some new MsBuild scripts that have been running on my > CruiseControl server for approximatley a month. I am using a few > custom MsBuild Tasks, but the last time they were changed was about > two months ago. Suddenly, last week, MSBuild started crashing with an > error reporting dialog. Here's the Event for the crash: > > EventType clr20r3, P1 msbuild.exe, P2 2.0.50727.1433, P3 471ec246, P4 > mscorlib, P5 2.0.0.0, P6 471ebc5b, P7 1153, P8 0, P9 > system.objectdisposedexception, P10 NIL. > > I have no idea what's causing it. If anyone has any insight, that > would be fantastic. > > In addition, after the crash, CruiseControl cannot fully recover. The > server still receives messages from the dashboard/cctray to force, > abort, and cancel builds, however CCNET is unable to actually start > any builds. I try to kill the server and the log spew says it is > stopping my projects, but the window is unable to close on its own. I > usually end up killing it through Task Mnaager. If I try to start the > server up again, I get this: > > 2008-11-25 10:11:42,014 [CCNet Server:ERROR] INTERNAL ERROR: Remoting > configuration failed with the exception > 'System.Reflection.TargetInvocationException: Exception has been > thrown by the target of an invocation. ---> > System.Net.Sockets.SocketException: Only one usage of each socket > address (protocol/network address/port) is normally permitted > at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, > SocketAddress socketAddress) > at System.Net.Sockets.Socket.Bind(EndPoint localEP) > at System.Net.Sockets.TcpListener.Start(Int32 backlog) > at System.Net.Sockets.TcpListener.Start() > at System.Runtime.Remoting.Channels.ExclusiveTcpListener.Start > (Boolean exclusiveAddressUse) > at > System.Runtime.Remoting.Channels.Tcp.TcpServerChannel.StartListening > (Object data) > at > System.Runtime.Remoting.Channels.Tcp.TcpServerChannel.SetupChannel() > at System.Runtime.Remoting.Channels.Tcp.TcpServerChannel..ctor > (IDictionary properties, IServerChannelSinkProvider sinkProvider, > IAuthorizeRemotingConnection authorizeCallback) > at System.Runtime.Remoting.Channels.Tcp.TcpChannel..ctor > (IDictionary properties, IClientChannelSinkProvider > clientSinkProvider, IServerChannelSinkProvider serverSinkProvider) > --- End of inner exception stack trace --- > at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, > SignatureStruct& signature, IntPtr declaringType) > at System.RuntimeMethodHandle.InvokeConstructor(Object[] args, > SignatureStruct signature, RuntimeTypeHandle declaringType) > at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags > invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) > at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, > Binder binder, Object[] args, CultureInfo culture, Object[] > activationAttributes) > at System.Activator.CreateInstance(Type type, BindingFlags > bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object > [] activationAttributes) > at > System.Runtime.Remoting.RemotingConfigHandler.CreateChannelFromConfigEntry > (ChannelEntry entry) > at System.Runtime.Remoting.RemotingConfigHandler.ConfigureChannels > (RemotingXmlConfigFileData configData, Boolean ensureSecurity) > at System.Runtime.Remoting.RemotingConfigHandler.ConfigureRemoting > (RemotingXmlConfigFileData configData, Boolean ensureSecurity)'. > ---------- > System.Runtime.Remoting.RemotingException: Remoting configuration > failed with the exception > 'System.Reflection.TargetInvocationException: Exception has been > thrown by the target of an invocation. ---> > System.Net.Sockets.SocketException: Only one usage of each socket > address (protocol/network address/port) is normally permitted > at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, > SocketAddress socketAddress) > at System.Net.Sockets.Socket.Bind(EndPoint localEP) > at System.Net.Sockets.TcpListener.Start(Int32 backlog) > at System.Net.Sockets.TcpListener.Start() > at System.Runtime.Remoting.Channels.ExclusiveTcpListener.Start > (Boolean exclusiveAddressUse) > at > System.Runtime.Remoting.Channels.Tcp.TcpServerChannel.StartListening > (Object data) > at > System.Runtime.Remoting.Channels.Tcp.TcpServerChannel.SetupChannel() > at System.Runtime.Remoting.Channels.Tcp.TcpServerChannel..ctor > (IDictionary properties, IServerChannelSinkProvider sinkProvider, > IAuthorizeRemotingConnection authorizeCallback) > at System.Runtime.Remoting.Channels.Tcp.TcpChannel..ctor > (IDictionary properties, IClientChannelSinkProvider > clientSinkProvider, IServerChannelSinkProvider serverSinkProvider) > --- End of inner exception stack trace --- > at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, > SignatureStruct& signature, IntPtr declaringType) > at System.RuntimeMethodHandle.InvokeConstructor(Object[] args, > SignatureStruct signature, RuntimeTypeHandle declaringType) > at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags > invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) > at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, > Binder binder, Object[] args, CultureInfo culture, Object[] > activationAttributes) > at System.Activator.CreateInstance(Type type, BindingFlags > bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object > [] activationAttributes) > at > System.Runtime.Remoting.RemotingConfigHandler.CreateChannelFromConfigEntry > (ChannelEntry entry) > at System.Runtime.Remoting.RemotingConfigHandler.ConfigureChannels > (RemotingXmlConfigFileData configData, Boolean ensureSecurity) > at System.Runtime.Remoting.RemotingConfigHandler.ConfigureRemoting > (RemotingXmlConfigFileData configData, Boolean ensureSecurity)'. > at System.Runtime.Remoting.RemotingConfigHandler.ConfigureRemoting > (RemotingXmlConfigFileData configData, Boolean ensureSecurity) > at System.Runtime.Remoting.RemotingConfigHandler.DoConfiguration > (String filename, Boolean ensureSecurity) > at System.Runtime.Remoting.RemotingConfiguration.Configure(String > filename, Boolean ensureSecurity) > at ThoughtWorks.CruiseControl.Core.CruiseServerFactory.Create > (Boolean remote, String configFile) > at ThoughtWorks.CruiseControl.Core.ConsoleRunner.LaunchServer() > at ThoughtWorks.CruiseControl.Core.ConsoleRunner.Run() > at ThoughtWorks.CruiseControl.Console.ConsoleMain.Main(String[] > args) > ---------- > > Any ideas on either of my problems? > > Much appreciated. > -- Adam Dickinson
