Hi
you just found the problem somehow you got <coverageReport2 reportTitle="Module Class Summary" date="Mon ... it should be <coverageReport reportTitle="Module Class Summary" date="Mon ... without that 2 I have no idea how that 2 got in there, did you alter something on the ncoverexplorer side (xsl or so) otherwise, you can adjust the ncoverexplorer.xsl of the dashboard, so that it scans for <coverageReport2 iso <coverageReport with kind regards Ruben Willems On Tue, Dec 16, 2008 at 1:18 PM, Mikke <[email protected]> wrote: > > Hi! > > Yes I have coverage report in build log: > > <coverageReport2 reportTitle="Module Class Summary" date="Mon > 15-Dec-2008" time="14:45:51" version="2.1.0.0"> > ... > </coverageReport2> > > On same file I have nunit and nant results and they are working fine. > And from coverage file I'll manage to get full coverage report, and > everything else seems to be fine... > > -Mikke > > 2008/12/16 Ruben Willems <[email protected]>: > > Hi > > > > > > do you have a <coverageReport> section in the build files(found in the > > artifacts folder)? > > just check to be sure that the ncover result is merged > > > > > > with kind regards > > Ruben Willems > > > > > > On Tue, Dec 16, 2008 at 1:04 PM, Mikke <[email protected]> > wrote: > >> > >> Hello! > >> > >> Thanks for the answer. > >> > >> Yes I have been using ncoverexplorer.exe in build process. So the only > >> change is that I installed new version of CCNet, previously I had > >> 1.4.1.xxx. And now I can't get coverage reports to web page. > >> > >> -Mikke > >> > >> 2008/12/16 Ruben Willems <[email protected]>: > >> > Hi > >> > > >> > > >> > you're using the ncover explorer setting, > >> > if you're using ncoverExplorer.exe in your buiold process, this is ok, > >> > > >> > otherwise you can try to use the following files > >> > NCover.xsl > >> > NCoverSummary.xsl > >> > > >> > > >> > you can find these files in the xsl folder of the dashboard > >> > > >> > > >> > with kind regards > >> > Ruben Willems > >> > > >> > On Tue, Dec 16, 2008 at 12:37 PM, Mikke <[email protected]> > >> > wrote: > >> >> > >> >> Hi! > >> >> > >> >> I downloaded and installed new version of ccnet. Unfortunately I was > >> >> too eager to do it and didn't take backup of my dashboard.config. Now > >> >> I have problems showing coverage results on project pages. I had them > >> >> before new version. Here is ncover settings from dashboard.config: > >> >> > >> >> <buildPlugins> > >> >> <buildReportBuildPlugin> > >> >> <xslFileNames> > >> >> <xslFile>xsl\NCoverExplorerSummary.xsl</xslFile> > >> >> </xslFileNames> > >> >> </buildReportBuildPlugin> > >> >> <buildLogBuildPlugin /> > >> >> <xslReportBuildPlugin description="NCover Report" > >> >> actionName="NCoverBuildReport" xslFileName="xsl\NCoverExplorer.xsl" > /> > >> >> </buildPlugins> > >> >> > >> >> I haven't done any changes for generating coverage files so I'm > >> >> assuming that problem is with this dashboard configuration, but I > >> >> can't remember if I changed something else in config? > >> >> > >> >> > >> >> Cheers, > >> >> > >> >> Mikke > >> > > >> > > >> > >> > >> > >> -- > >> > >> "Some people believe football is a matter of life and death. > >> I'm very disappointed with that attitude. > >> I can assure you it is much, much more important than that." > >> - Bill Shankly > > > > > > > > -- > > "Some people believe football is a matter of life and death. > I'm very disappointed with that attitude. > I can assure you it is much, much more important than that." > - Bill Shankly >
