Hi Craig, I installed CruiseControl.NET-1.5.6819.1-Setup.exe and still no luck.
It did not report an error on line 3 with a missing/closing > symbol. With the dupfinder task included, the error states unused node detected but no line number or anything to indicate what node it is seeing as unused. I can only assume it is the dupfinder task since when I remove it, the ccnet.config passes validation. Is there any way you can append onto the validation error message "unused node detected: <dupfinder>" or whatever it might be just so I can get a read on what it is seeing as an unused node? The line number would be super helpful too. btw is there any keyboard shortcuts to move from / between the various tabs on the UI? For example, press f6 to move from window to window and tab through all items? /Justin ----- Original Message ----- From: Craig Sutherland To: [email protected] Sent: Monday, February 01, 2010 10:23 PM Subject: RE: [ccnet-user] rc1 error using dupfinder Hi Justin, I copied and pasted your config below and I get an error. This is caused by a missing < in the config - on line 3 you have missed the <. This raises an issue with CCValidator not displaying meaningful error messages, plus displaying incorrect configuration. I have made a couple of quick changes to CCvalidator to try and correct these problems. Can you please get the latest build from ccnetlive and see if it is any better. Craig From: [email protected] [mailto:[email protected]] On Behalf Of Justin Daubenmire Sent: Tuesday, 2 February 2010 12:49 p.m. To: [email protected] Subject: Re: [ccnet-user] rc1 error using dupfinder Hey Ruben, The below advice did not work. Now this silly situation gets worse. I updated to the latest nightly build from feb 1 2010 - CruiseControl.NET-1.5.6814.1-Setup.exe. Now when I validate the ccnet.config file, which includes the dupfinder task, I get this error: CruiseControl...Net Validation Results Configuration contains invalid XML: The configuration file contains invalid xml: G:\build\tools\CruiseControl.NET\server\ccnet.config When I remove the dupfinder task, it passes validation! This is all with the ccnet service disabled. Help! Anyone? :D Any ideas? /Justin ----- Original Message ----- From: Ruben Willems To: [email protected] Sent: Monday, February 01, 2010 2:31 AM Subject: Re: [ccnet-user] rc1 error using dupfinder Hi this sounds weird .... I would do the following : ° stop cc service / cc console ° check the config (see that the <fileMask>*.vb</fileMask> is there) ° validate this should work with kind regards Ruben Willems On Mon, Feb 1, 2010 at 7:31 AM, Justin Daubenmire <[email protected]> wrote: Hey guys, Here is something I just tried and wanted to report it. I left the dupfinder task uncommented and the cc validator said the ccnet.config file was not valid... unused node detected. I went to the web dashboard and there was no errors displayed related to the ccnet.config file being invalid. I forced a build and the build worked and was successful. However, the dupfinder task was never ran nor showed up in the ccnet.log file. The dupfinder task is uncommented in the ccnet.config file. It is though cc validator says it is invalid and the ccnet service just skips it but nothing shows up in the ccnet.log file and it was as though it was never ran even though it is uncommented and in place. I also opened up ccnet.config within vs 2008 just to validate that all xml was properly closed and there were no errors. There is something causing this problem. Is there anything else I can get you guys to help diagnose this situation? Any ideas? /Justin ----- Original Message ----- From: Ruben Willems To: [email protected] Sent: Sunday, January 31, 2010 2:19 PM Subject: Re: [ccnet-user] rc1 error using dupfinder Hi yep it passes if i past it in, and when I commented it out, and re-validate, it fails weird ... with kind regards Ruben Willems On Sun, Jan 31, 2010 at 7:42 PM, Justin Daubenmire <[email protected]> wrote: Hi Ruben, Here is my complete xml, including the missing fileMask for dupfinder, and it does not pass ccnet validation on my end - it errors saying unused node detected. Can you please copy/paste the below xml into a ccnet.config on your end and validate it and see if it passes? Thanks! <cruisecontrol xmlns:cb="urn:ccnet.config.builder"> <project name="MyApplication"> workingDirectory>G:\Build\projects\MyApplication\code\</workingDirectory> <artifactDirectory>G:\Build\Projects\MyApplication\Artifacts\</artifactDirectory> <webURL>http://MyServer/ccnet/</webURL> <modificationDelaySeconds>10</modificationDelaySeconds> <triggers> <intervalTrigger name="continuous" seconds="60" buildCondition="IfModificationExists" initialSeconds="30"/> </triggers> <labeller type="assemblyVersionLabeller"> <major>1</major> <minor>0</minor> <incrementOnFailure>true</incrementOnFailure> </labeller> <sourcecontrol type="svn" autoGetSource="true"> <executable>g:\Program Files\VisualSVN Server\bin\svn.exe</executable> <workingDirectory></workingDirectory> <username>foo</username> <password>foo</password> <trunkUrl>https://MyApplication.MySVNServer/MyApplication/branches/experimental</trunkUrl> </sourcecontrol> <tasks> <nant> <executable>G:\Build\Tools\Nant\bin\nant.exe</executable> <baseDirectory>G:\Build\Scripts\</baseDirectory> <nologo>true</nologo> <buildFile>VersionAssemblies.build</buildFile> <logger>NAnt.Core.XmlLogger</logger> <targetList> <target>version-assemblies</target> </targetList> <buildTimeoutSeconds>6000</buildTimeoutSeconds> </nant> <msbuild> <executable>g:\WINDOWS\Microsoft.NET\Framework\v3.5\MSBuild.exe</executable> <workingDirectory></workingDirectory> <projectFile>MyApplication.sln</projectFile> <timeout>900</timeout> <logger>G:\Build\tools\CruiseControl.NET\server\ThoughtWorks.CruiseControl.MsBuild.dll</logger> </msbuild> <nant> <executable>G:\Build\Tools\Nant\bin\nant.exe</executable> <baseDirectory>G:\Build\Scripts</baseDirectory> <nologo>true</nologo> <buildFile>MyApplication.build</buildFile> <logger>NAnt.Core.XmlLogger</logger> <targetList> <target>run-reports</target> </targetList> <buildTimeoutSeconds>6000</buildTimeoutSeconds> </nant> <dupfinder> <fileMask>*.vb</fileMask> <includeCode>True</includeCode> <inputDir>g:\MyApplication\Code</inputDir> <recurse>True</recurse> <shortenNames>True</shortenNames> <threshold>5</threshold> <timeout>600</timeout> <width>2</width> <executable>g:\build\tools\DuplicateFinder1.5\DupFinder.exe</executable> <excludeFiles>AssemblyInfo.vb</excludeFiles> </dupfinder> </tasks> <publishers> <merge> <files> <file>G:\Build\Projects\MyApplication\Artifacts\nunit-results.xml</file> <file>G:\build\projects\MyApplication\artifacts\CoverageReport.xml</file> <file>G:\build\projects\MyApplication\artifacts\CoverageMerge.xml</file> <file>G:\build\projects\MyApplication\artifacts\Coverage.xml</file> </files> </merge> <xmllogger /> <rss/> <statistics /> <artifactcleanup cleanUpMethod="KeepLastXBuilds" cleanUpValue="50" /> <modificationHistory onlyLogWhenChangesFound="true" /> </publishers> </project> </cruisecontrol>
