I'm running the latest version 1.5.6960.1 from ccnetlive. I tried pasting the complete error log but then google won't accept the message. I'll send it to your mail address.
Markus On 15 Mrz., 02:30, "Craig Sutherland" <[email protected]> wrote: > It is not recognising the task. What version of CC.NET are you running? > > Craig > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > > Behalf Of MarkusW > Sent: Monday, 15 March 2010 2:14 p.m. > To: ccnet-user > Subject: [ccnet-user] Re: Stop all projets at once > > > 1. Yes, it looks complete. > > Obviously it isn't. As the _Stop_All_Projects/_Start_All_Projects > projects were not recognized i ran ccnet.exe. Unfortunately the output isn't > of any help to me. > > [CCNet Server:ERROR] Exception: Unused node detected: > <cruiseServerControl><acti > ons><controlAction><project>*</project><type>StopProject</type></ > controlAction>< > /actions></cruiseServerControl> > > What did I do wrong? > > TIA, > > Markus > > On 13 Mrz., 10:04, "Craig & Sammi Sutherland" > <[email protected]> wrote: > > Hi Markus, > > > Answers to your questions: > > 1. Yes, it looks complete. > > > 2. It would send multiple stop commands (since the task does not check > > the current status). However, when the server gets these commands, it > > would ignore them, since the projects are already stopped (the single > > exception will the stop-all project, since doing a force build > > automatically re-starts > > it.) > > > 3. This is similar to #2 - since the projects are already started, it > > would ignore the commands. > > > 4. You shouldn't. The start/stop commands are the same as pressing the > > start/stop button on the dashboard - it will not perform a build > > (unless the project has been configured to build on start-up.) > > > Craig > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] > > On > > > Behalf Of MarkusW > > Sent: Saturday, 13 March 2010 2:21 a.m. > > To: ccnet-user > > Subject: [ccnet-user] Re: Stop all projets at once > > > Hi Craig, > > > looks like you just implemented exactly what I was looking for. :-) > > Now a few questioons came up. > > > 1. I'd use this XML markup for a "stop all" project. Is it correct and > > complete? > > > <project name="_Stop_All_Projects" category="Others" > > queue="General"> > > <webURL>http://buildserver/ccnet/</webURL> > > <workingDirectory>C:\AutomatedBuild</workingDirectory> > > <artifactDirectory>C:\AutomatedBuild\Output\Others > > \_Stop_All_Projects</artifactDirectory> > > <state type="state" > > directory="C:\AutomatedBuild\Output" /> > > <!-- A force build of this project sends a STOP > > command to all projects. --> > > <cruiseServerControl> > > <actions> > > <controlAction> > > <project>*</project> > > <type>StopProject</type> > > </controlAction> > > </actions> > > </cruiseServerControl> > > </project> > > > 2. What happens when a user hits the [Force] button of the "stop all" > > project on the web dashboard several times in a row? > > > 3. Can something bad happen when a user hits the [Force] button of the > > "start all" project on the web dashboard while all projects are > > running? > > > 4. Most of our projects are running an interval trigger. A few are > > "force build only". Will I run into problems? > > > TIA, > > > Markus Winhard > > > On 12 Mrz., 09:07, "Craig & Sammi Sutherland" > > <[email protected]> wrote: > > > Hi Markus, > > > > This is a good idea and one that is reasonably easy to implement - > > > so I > > have > > > added it to the latest build. > > > > As an example, you can now use the following task to stop all the > > > projects on a server: > > > <cruiseServerControl> > > > <actions> > > > <controlAction> > > > <project>*</project> > > > <type>StopProject</type> > > > </controlAction> > > > </actions> > > > </cruiseServerControl> > > > > The project uses the standard Windows wildcard mappings - i.e. * and ?. > > You > > > can use these to build a "pattern" of projects to apply the commands > > > to (e.g. "*-Build", "Project?", etc.) > > > > If you want a client-side app, the options are using something like > > > FastForward.NET (as suggested by Christophe - available > > fromhttp://www.ohloh.net/p/FastForwardNET/download) or building your > > own custom > > > program (as suggested by Ruben). > > > > One thing to note with these (and any other approach for sending a > > > stop command), the stop command will change the project state to > > > Stopping. If there is a build in progress it will remain in this > > > state until the build has finished and then transition to Stopped. > > > If there is no build it will change immediately to Stopped. So if > > > the stop command does not work immediately, this is probably why. > > > > Hope this helps, > > > > Craig > > > > -----Original Message----- > > > From: [email protected] > > > [mailto:[email protected]] On > > > > Behalf Of MarkusW > > > Sent: Friday, 12 March 2010 7:11 a.m. > > > To: ccnet-user > > > Subject: [ccnet-user] Re: Stop all projets at once > > > > What about using a star for the project name or an empty project > > > name? > > > e.g. <controlAction type="StopProject" project="*" /> Will this > > > automatically stop all projects? > > > > Markus > > > > On 11 Mrz., 10:32, JayFleming <[email protected]> > > > wrote: > > > > Hi Markus, > > > > > If you're on version 1.5+ you could have a control project that > > > > ran multiple CruiseServerControl tasks to shut down all the > > > > projects from one > > clickhttp://confluence.public.thoughtworks.org/display/CCNET/CruiseServer+.. > > > .. > > > > > There is the pain of setting up the 50+ tasks initially, but it > > > > could be more practical in the end...the control project could > > > > just be scheduled to shut everything down 5 minutes before your > > > > source VM is taken offline. > > > > > Cheers, > > > > Jay- Zitierten Text ausblenden - > > > > - Zitierten Text anzeigen -- Zitierten Text ausblenden - > > > - Zitierten Text anzeigen-- Zitierten Text ausblenden - > > - Zitierten Text anzeigen -
