hello everybody, Thank you for all your suggestions. I am able to process the 2 data sets separately. But the problem is that I dont have an idea as to how can i merge the 2 data sets with different 2theta values.
On Tue, Apr 9, 2013 at 5:48 PM, <herman.schreu...@sanofi.com> wrote: > ** > Dear Navin, > > As others have pointed out, it is not clear where your problem exactly > lies: Are you not able to process the 2theta=20° run, or are you not able > to merge it with the 2theta=0° run? Anyways, I and others have had similar > problems with merging high and low resolution runs, see a very recent > thread below: > > http://www.mail-archive.com/ccp4bb@jiscmail.ac.uk/msg30764.html > > In my case, Scala would fail with low redundancy data or when there are > too few reflections in common between both runs. What worked for me is to > process with XDS and scale with XSCALE. For this you can use the autoProc > procedure of global phasing, or teh Xia2 pipeline which seems to be part of > CCP4. Using one of these pipelines will probably also solve your problem if > you are not able to process the swing-out run. > > Good luck! > Herman > > ------------------------------ > *From:* CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] *On Behalf Of > *navin > narayanan > *Sent:* Tuesday, April 09, 2013 1:49 PM > *To:* CCP4BB@JISCMAIL.AC.UK > *Subject:* [ccp4bb] 2Theta data set solving problem > > Hello everybody, > > We have a diffraction data set from home source with 2theta at 20deg. > But we are not able to solve the data set using CCP4 suite. The software is > picking up only the lower resolution data but not the higher resolution > data points. Also we are not able to merge data two sets, one with 2theta > at 0deg and the other with 2theta at 20deg. Is there anyway to solve the > data. Any help will be truly appreciated. Thank you in advance. > > > > Navin V Narayanan > >