Dear CCP4 Community: Happy Holidays!
Sorry for bringing up this old topic again. However after some recent struggle with rather poor crystals and my deteriorating eye sights, I have decided I need a couple 3D capable (cheap) workstations in lab. After reviewing previous posts and the two web-pages suggested by Folmer, I understand that active stereo is still the preferred method, just like many years ago with CRT, emitters and expensive quadro cards. However, since I cannot just buy and tryout hardware, I have the following questions: 1. Will any high refresh rate LCD work? The ones suggested in the guide and by Jeroen are either unavailable or expensive. 2. High end 3-pin Quadro card are a bit out of reach at the moment, can I just use consumer grade Geforce with NV3D vision 2? The most expensive ones I have are a few GTX 460, 950, 750Ti (I even have an ancient FX1400 but the guide says it doesn't work). Of course I can buy better GTX cards if needed as long as I don't have to buy quadros--they are really expensive and hard to find here. 3. Is there a cheap option to enable 3D under linux or OSX? I do prefer OSX but I can live with any OS as long as I get 3D to work with coot. Thank you so much for your time. Changrui Lu Nucleic Acid and Structural Biology Group College of Chemistry, Chemical Engineering and Bioengineering Donghua University 2999 North Ren Min Road, Shanghai 201620, China Tel: 86-21-67792740 Fax: 86-21-67792740 E-mail: c...@dhu.edu.cn