> On Jun 14, 2015, at 10:01, tony duell <a...@p850ug1.demon.co.uk> wrote: > > If the connector on the DELUA board is a normal Berg-type header (and I think > it is) then maybe you could > use a piece of (twist-n-flat?) ribbon cable to make an extension that could > be routed through the cable > pan arrangement and then connected to the original DELUA cable back in the > rack cabinet.
That might be a good approach. The DELUA end of the cable has a Berg connector, and the other end has the typical 15-pin D-sub AUI connector with a slide latch. I'll look up the cable wiring to see if signals that would best be twisted pairs are conveniently placed on adjacent odd/even pins, such that twisted pair ribbon cable would work well electrically. Or maybe I can use the round cable that I already have, with P-shaped cable clamps screwed down using the screws at one end of the flat cable clamps. There may not be enough clearance in the tray for that. -- Mark J. Blair, NF6X <n...@nf6x.net> http://www.nf6x.net/
